"Xiaoyou ZHANG,Tadahiko SHINSHI,Teruaki FUKUOKA,Takahiro NAKAI","Development of a 2-DOF Controlled Magnetic Drive Actuator for Laser Beam Cutting",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing","The Japan Society of Mechanical Engineers","Vol. 7","No. 3","p. 448-457",2013,Sept.
"Xiaoyou Zhang,Deqiang Chu,Tadahiko Shinshi,Teruaki Fukuoka,Takahiro Nakai","Adaptive Control of Magnetic Drive Actuator for Laser Cutting","2nd International Conference on Manufacturing Engineering and Automation","Advanced Materials Research","Trans Tech Publications","Vol. 591-593",,"pp. 1155-1159",2012,Nov.
"? 徳強,張 暁友,進士 忠彦,福岡 輝章,中井 孝洋","レーザ加工機用磁気駆動アクチュエータの精密制御","第9回生産加工・工作機械部門講演会","第9回生産加工・工作機械部門講演会論文集","日本機械学会",,,"p. 25-26",2012,Oct.
"Xiaoyou Zhang,Deqiang Chu,Tadahiko Shinshi,Teruaki Fukuoka,Takahiro Nakai","Precision Control of Magnetic Drive Actuator Used for Laser Cutting wirh Compensation of Zero Point of Displacement Sensor","2nd International Conference on Advanced Design and Manufacturing Engineering","Applied Mechanics and Materials","Trans Tech Publications","Vol. 220-223",,"pp. 978-982",2012,Aug.
"Yoshitaka UEYAMA,Tadahiko SHINSHI,Takashi YUZAWA,Shuichi FUJIKAWA,Xiaoyou ZHANG","Runout Compensation of Rotary Electrode in Hole Electrical Discharge Machining","The 6th International Conference on Leading Edge Manufacturing in 21st Century","Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century","The Japan Society of Mrchanical Engineers",,,,2011,Nov.
"Dongjue HE,Tadahiko SHINSHI,Xiaoyou ZHANG,Takashi YUZAWA,Tatsushi SATO","Improving the Speed of Small Deep Hole Electrical Discharge Machining by Combining Rotation of the Electrode with a Rapid-Response",,"Journal of Advanced Mechanical Design,Systems,and Manufacturing","JSME","Vol. 5","No. 4","p. 284-294",2011,Oct.
"Dongjue HE,Tadahiko SHINSHI,Xiaoyou ZHANG,Takashi YUZAWA,Tatsushi SATO","Micro Hole Electrical Discharge Machining Assisted by a Multi-DOF and High-Responce Maglev Local Actuator","The 6th International Conference on MicroManufacturing ICOMM/2011","The 6th International Conference on MicroManufacturing ICOMM/2011",,,"No. 32","pp. 107-112",2011,Mar.
"上山 吉崇,進士 忠彦,湯澤 隆,佐藤 達志,張 暁友","磁気軸受による回転電極ふれまわり補正を用いた放電穴加工","2011年度精密工学会春季大会","2011年度精密工学秋春季大会学術講演会講演論文集","精密工学会",,,"p. 21-22",2011,Mar.
"上山吉崇,進士忠彦,張暁友,湯澤崇,佐藤達志","高応答・多自由度磁気浮上アクチュエータを用いた放電穴加工（穴加工速度における電極運動の方向，振幅および周波数の影響）",,"日本機械学会論文集（C編）","日本機械学会","  77","  773","  196-203",2011,Jan.
"Dongjue He,Tadahiko Shinshi,Xiaoyou Zhang,Takashi Yuzawa,Tatsushi Sato","High Speed Electrical Discharge Machining Using a Combination of 5-DOF Controlled Maglev Actuator and Conventional EDM Machine","The Twenty-fifth Annual Meeting of The American Society for Precision Engineering","Proceedings of The Twenty-fifth Annual Meeting of The American Society for Precision Engineering","American Society for Precision Engineering",,,,2010,Nov.
"Yoshitaka UEYAMA,Tadahiko SHINSHI,Tatsushi SATO,Xiaoyou ZHANG","Electrical Discharge Machining of Small Holes Assisted by a High Speed and Multi Dof Controlled maglev Actuator","The 4th International Conference on Positioning Technology","The 4th International Conference on Positioning Technology","The 4th International Conference on Positioning Technology",,,"pp. 119-122",2010,Nov.
"進士 忠彦,上山 吉崇,HeDongjue,張 暁友,湯澤 隆,佐藤 達志","多自由度磁気浮上アクチュエータを用いた高速・高精度放電加工の研究","第14回国際工作機械技術者会議","第14回国際工作機械技術者会議論文集（ポスターセッション論文抜粋版）","日本工作機械工業会",,,"p. 72-73",2010,Oct.
"上山吉崇,HE Dongjue,進士忠彦,湯澤隆,佐藤達志,張暁友","磁気軸受を用いた放電加工用回転電極の取り付け誤差補正","2010年度精密工学会秋季大会","2010年度精密工学会秋季大会学術講演会講演論文集","社団法人 精密工学会",,,"p. 901‐902",2010,Sept.
"Dongjue He,Tadahiko Shinshi,Xiaoyou Zhang","Cooperative Control of a Maglev Local Actuator with a Conventional EDM Machine for High Speed Electrical Discharge Machining","ISMB12(The Twelfth International Symposium on Magnetic Bearings)","Proceedings of the Twelfth International Symposium on Magnetic Bearings","Wuhan University of Technology Press",,,"page 167-172",2010,Aug.
"Dongjue He,Hiroki Morita,Xiaoyou Zhang,Tadahiko Shinshi,Takayuki Nakagawa,Tatsusi Sato,Hidetaka Miyake","Developement of a novel 5-DOF controlled maglev local actuator for high-speed electrical discharge machining",,"Precision Engineering","Elsevier",,"no. 34","pp. 453-460",2010,July
"上山吉崇,張暁友,進士忠彦,下河邉明,中川孝幸,佐藤達志,三宅英孝","磁気浮上アクチュエータを用いた微細穴放電加工",,"精密工学会誌","精密工学会","Vol. 76","No. 6","page 638-642",2010,June
"上山 吉崇,進士 忠彦,張 暁友,中川 孝幸,佐藤 達志","放電加工用磁気浮上アクチュエータの研究（第５報）","2010年度精密工学会春季大会","2010年度精密工学会春季大会学術講演会講演論文集","精密工学会",,,"pp. 575-576",2010,Mar.
"Yoshitaka UEYAMA,Xiaoyou ZHANG,Tadahiko SHINSHI,Akira SHIMOKOHBE,Takayuki NAKAGAWA,Tatsushi SATO,Hidetaka MIYAKE","Cooperative Control System of a Maglev Local Actuator and a Conventional EDM Machine","the 5th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century","The Japan Society of Mechanical Engineers(JSME)",,"No. 09-207","pp. 203-206",2009,Dec.
"Chi Nan Pai,Tadahiko Shinshi,Xiaoyou Zhang,Akira Shimokohbe","Radial Hydraulic Force Estimation In A Magnetically Levitated Centrifugal Blood Pump","the 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment","Proceedings of the 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment",,,,"pp. 215-216",2009,June
"Yoshitaka UEYAMA,Tadahiko SHINSHI,Xiaoyou ZHANG,Akira SHIMOKOHBE","Small Hole Machining Using a Combination of a 5-DOF Controlled Maglev Actuator and a Conventional Electrical Discharge Machine","the 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment","Proceedings of the 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment",,,,"pp. 335-336",2009,June
"湯本淳史,進士忠彦,張暁友,下河邉明","小型遠心血液ポンプ用アキシャル制御型磁気浮上モータ","第21回電磁力関連のダイナミクスシンポジウム","第21回電磁力関連のダイナミクスシンポジウム講演論文集",,,,"pp. 235-238",2009,May
"上山吉崇,張 暁友,進士忠彦,下河邉明","放電加工用磁気浮上アクチュエータの研究（第４報）?穴加工における電極ジャンプ・加振効果の検討?","2009年度 精密工学会春季大会学術講演会","2009年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 877-878",2009,Mar.
"X. Zhang,Y. Ueyama,Tadahiko Shinshi,Akira Shimokohbe,T. Sato,H. Miyake,T. Nakagawa.","High-speed and High-accuracy EDM of Micro Holes by Using a 5-DOF Controlled Maglev Local Actuator","The 13th international Manufacturing Conference in China 2009 (IMCC2009)","Materials Science Forum",,"vol. 626-627",,"pp. 255-260",2009,
"張暁友,進士忠彦,下河邉明","新給電機構を有する高速放電加工用コンパクト磁気浮上アクチュエータ","生産と加工に関する学術講演会2008","第７回生産加工・工作機械部門講演会論文集","社団法人日本機械学会",,"No. 8-19","pp. 241-242",2008,Nov.
"上山吉崇,張暁友,進士忠彦,下河邉明","磁気浮上アクチュエータを用いた放電加工におけるジャンプフラッシング","生産と加工に関する学術講演会2008","第７回生産加工・工作機械部門講演会論文集","社団法人日本機械学会",,"No. 8-19","pp. 155-156",2008,Nov.
"Xiaoyou ZHANG,Tadahiko SHINSHI,Akira SHIMOKOHBE,Tatsushi SATO,Hidetaka MIYAKE,Takayuki NAKAGAWA","High-speed Electrical Discharge Machining By Using a 5-DOF Controlled Maglev Local Actuator",,"Journal of Advanced Mechanical Design, Systems, and Manufacturing",,"Vol. 2","No. 4","pp. 493-503",2008,Aug.
"Tadahiko SHINSHI,Shunji GOTO,Xiaoyou ZHANG,Akira SHIMOKOHBE,Setsuo TAKATANI","A Mini-Centrifugal Blood Pump Using 2-DOF Controlled Magnetic Bearing",,"Proceedings of 11th International Symposium on Magnetic Bearings (ISMB11)",,,,"pp. 274-279",2008,Aug.
"Xiaoyou ZHANG,Tadahiko SHINSHI,Hiroki Morita,Akira SHIMOKOHBE,Tatsushi SATO","A maglev local actuator for high speed electrical discharge machining",,"Proceedings of 11th International Symposium on Magnetic Bearings (ISMB11)",,,,"pp. 261-266",2008,Aug.
"Xiaoyou ZHANG,Tadahiko SHINSHI,Go KAJIWARA,Akira SHIMOKOHBE","A 5-DOF Controlled Maglev Local Actuator and its Application to Electrical Discharge Machining",,"Precision Engineering",,"Vol. 32","No. 4","pp. 289-300",2008,July
"湯本淳史,進士忠彦,張暁友,下河邉明","小型遠心ポンプ用１自由度制御型磁気軸受の研究",,"日本機械学会誌論文集C編",,"Vol. 74","No. 742","pp. 1625-1630",2008,June
"湯本 淳史,進士忠彦,張暁友,下河辺明","小型遠心血液ポンプ用１自由度制御型磁気浮上モータ",,"第20回「電磁力関連のダイナミクス」シンポジウム論文集",,,,"pp. 129-132",2008,May
"張 暁友,進士忠彦,森田 浩基,下河邉 明","高速放電加工用磁気浮上アクチュエータにおける新給電機構",,"第20回「電磁力関連のダイナミクス」シンポジウム論文集",,,,"pp. 363-366",2008,May
"Xiaoyou ZHANG,Tadahiko SHINSHI,Akira SHIMOKOHBE,Yoshihito IMAI,Hidetaka MIYAKE,Takayuki NAKAGAWA","High-speed Electrical Discharge Machining with a 5-DOF Controlled Maglev Actuator","4th International Conference on Leading Edge Manufacturing in 21st Century","Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century（LEM21）",,,,"pp. 191-196",2007,Nov.
"X. ZHANG,T. SHINSHI,H. ENDO,A. SHIMOKOHBE,Y. IMAI,H. MIYAKE,T. NAKAGAWA","Micro Electrical Discharge Machining Using a 5-DOF Controlled Maglev Actuator","ASPE 22nd Annual Meeting","Proceedings of the Twenty-second Annual ASPE Meeting",,"Vol. 42",,"pp. 36-39",2007,Oct.
"森田 浩基,張 暁友,進士 忠彦,遠藤 弘樹,下河邉 明,今井 祥人,三宅 英孝,中川 孝幸","放電加工用磁気浮上アクチュエータの研究（第３報）?アクチュエータバンド幅，加工コントローラゲインと加工速度の関係?","2007年度精密工学会秋季大会学術講演会","2007年度精密工学会秋季大会学術講演会講演集",,,,"pp. 157-158",2007,Sept.
"湯本 淳史,進士 忠彦,張 暁友,下河邉 明,高谷 節雄","小型遠心血液ポンプ用１自由度制御型磁気軸受の研究","2007年度精密工学会秋季大会学術講演会","2007年度精密工学会秋季大会学術講演会",,,,"pp. 159-160",2007,Sept.
"張 暁友,進士 忠彦,遠藤 弘樹,森田 浩基,下河辺明,今井 祥人,三宅 英孝,中川 孝幸","放電加工用磁気浮上アクチュエータの研究（第２報）?アクチュエータの高速・高精度化と放電加工への応用?","2007年度精密工学会秋季大会学術講演会","2007年度精密工学会秋季大会学術講演会講演集",,,,"pp. 155-156",2007,Sept.
"Tadahiko SHINSHI,Wataru HIJIKATA,Junichi ASAMA,Xiaoyou ZHANG,Akira SHIMOKOHBE,Setsuo TAKATANI","Centrifugal Blood Pumps Using Maglev Technology","Second TIT-BIT joint workshop on mechanical engineering","Proceedings of: second TIT-BIT joint workshop on mechanical engineering",,,,"pp. 55-61",2007,Aug.
"Xiaoyou ZHANG,Tadahiko SHINSHI,Hiroki ENDO,Akira SHIMOKOHBE,Yoshihito IMAI,Hidetaka MIYAKE,Takayuki NAKAGAWA","Development of a 5-DOF Controlled, Wide-Bandwidth, High-Precision Maglev Actuator for Micro Electrical Discharge Machining","The 2007 IEEE International Conference on Mechatronics and Automation","Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation",,,,"pp. 2877-2882",2007,Aug.
"張暁友,進士忠彦,遠藤弘樹,下河邉明,今井 祥人,三宅 英孝,中川 孝幸","精密・微細放電加工のための5自由度磁気浮上アクチュエータ","第６回生産加工・工作機械部門講演会","第6回生産加工・工作機械部門講演会講演論文集",,,"No. 06-34","p. 77-78",2006,Nov.
"Xiaoyou ZHANG,Tadahiko SHINSHI,Hiroki ENDO,Go KAJIWARA,Akira SHIMOKOHBE,Yoshihito IMAI,Hidetaka MIYAKE,Takayuki NAKAGAWA","A 5-DOF Controlled Maglev Actuator for Electrical Discharge Machining","The 2nd International Conference on Positioning Technology (ICPT 2006)","Proceedings of the 2nd International Conference on Positioning Technology (ICPT 2006)",,,,"pp. 20-21",2006,Oct.
"T. SHINSHI, X. ZHANG and A. SHIMOKOHBE","Suppression and Reduction of Harmonics Disturbance Force for Precision Magnetic Bearing","JSME Int. Conf. LEM 21","JSME Int. Conf. LEM 21",,,,"pp. 551-554",2003,Nov.
"X. ZHANG, T. SHINSHI, L. LI and A. SHIMOKOHBE","A Combined Repetitive Control for Precision Rotation of Magnetic Bearing",,"Precision Engineering",,"Vol. 27","No. 3","pp. 273-282",2003,Aug.
"T. SHINSHI, X. ZHANG, L. LI and A. SHIMOKOHBE","Precision Radial Magnetic Bearing Using Estimation of the Center of Inertia and Repetitive Control","The 3rd euspen International Conference, Eindhoven","Proceedings of the 3rd euspen International Conference, Eindhoven",,,,"pp. 163-166",2003,May
"L. LI, T. SHINSHI, C. IIJIMA, X. ZHANG and A. SHIMOKOHBE","Compensation of Rotor Imbalance for Precision Rotation of a Planar Magnetic Bearing Rotor",,"Precision Engineering",,"Vol. ２７","No. ２","pp. 140-150",2003,May
"進士　忠彦，張　暁友，下河辺明","磁気軸受を用いた高精度回転の実現",,"第３回機素潤滑設計部門講演会講演論文集",,,,"pp. 167",2003,Apr.
"進士忠彦，張　暁友，李　黎川，崔　起鳳，下河辺明","精密磁気軸受の研究（第１報）?２自由度制御型磁気軸受の試作と位置決め性能の評価?",,"2001年度精密工学会春季大会学術講演会講演集",,,,"pp. 540",2003,Mar.
"進士忠彦,張 暁友,下河邉 明","精密磁気軸受の研究（第５報）―モータ電磁加振力の低減と電磁振動の抑制―",,"2003年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 640",2003,Mar.
"張 暁友,進士忠彦,李 黎川,下河邉 明","精密磁気軸受の研究（第４報）?混合繰り返し制御による高精度回転の実現―",,"2002年度精密工学会春季大会学術講演会講演集",,,,"pp. 15",2002,Mar.
"TADAHIKO SHINSHI,X Zhang,L. Li,Akira Shimokohbe","Precision radial bearing using estimation of the center of inertia and repetitive control",,"Proceedings of 2002euspen",,,,"pp. 163-166",2002,
"進士忠彦,張 暁友,飯島 知弘,崔 起鳳,李 黎川,下河邉明","ラジアル磁気軸受の高精度制御",,"精密工学会誌",,"Vol. 67","No. 11","pp. 1803-1807",2001,Nov.
"進士忠彦,張暁友,李黎川,下河邉明","高精度磁気軸受の研究 ?推定回転中心での回転軸の運動制御―",,"日本機械学会 第３回生産加工・工作機械部門講演会講演論文集",,,,"pp. 19-20",2001,Nov.
"X. ZHANG, T. SHINSHI, L. LI, K. CHOI and A. SHIMOKOHBE","Precision Control of Radial Magnetic Bearing","The 10th International Conference on Precision Engineering (ICPE)","Proceedings of the 10th International Conference on Precision Engineering (ICPE)",,,,"pp. 714-718",2001,July
"張 暁友,進士忠彦,李 黎川,崔 起鳳,下河邉明","精密磁気軸受の研究（第２報）?２自由度制御型磁気軸受の回転精度?",,"2001年度精密工学会春季大会学術講演会講演集",,,,"pp. 541",2001,Mar.
"張暁友,進士忠彦,李黎川,下河邉明","精密磁気軸受の研究（第３報）?軸の慣性中心での回転制御―",,"2001年度精密工学会秋季大会学術講演会講演集",,,,"pp. 538",2001,
"T. SHINSHI, C. IIJIMA, X. ZHANG, K. CHOI, K. SATO and A. SHIMOKOHBE","Precision Radial Magnetic Bearing","The 15th ASPE Annual Meeting","Proceedings of the 15th ASPE Annual Meeting",,,,"pp. 240-243",2000,Nov.
"Tadahiko SHINSHI,Akira SHIMOKOHBE,Kaiji SATO,Chihiro IIJIMA,Xiaoyou Zhang","Precision Radial Magnetic Bearing",,"ASPE 15th Annual Meeting, Arizona, U.S.A.",,,,"pp. 240",2000,
"L. SUN, X. ZHANG and X. CHEN","Research on a New Fault Location Method for Parallel Electric Transmission Line",,"Automation of Electric Power Systems",,"Vol. 23","No. 5","pp. 28-30",1999,Oct.
"X. ZHANG, L. SUN, H. BEN and C. XU","Development of Fault Location Algorithm for Parallel-paired Multi-branch Electric Power Lines",,"Proceedings of the CSEE",,"Vol. 18","No. 3","pp. 182-186",1998,Sept.
"H. BEN, X. ZHANG and Z. LIU","Applications of Single-chip Microprocessors in Photocolorimeters",,"Analytical Instruments",,,"No. 2","pp. 23-26",1998,Apr.
"X. ZHANG, H. BEN and Z. LIU","Several Method to Improve Reliability of Single-chip Microprocessors Systems",,"Microprocessors",,,"No. 1","pp. 62-64",1998,Feb.
"X. ZHANG and Y. CAO","A Node Voltage Analysis Method for Fault Location in Parallel-paired Multi-branch Electric Power Lines",,"Relay",,"Vol. 25","No. 6","pp. 7-9",1997,Dec.
"X. ZHANG, G. ZAI and H. BEN","A Current difference Analysis Method for On-line Fault Location in Parallel-paired Multi-branch Electric Power Lines",,"Journal of Harbin Institute of Technology",,"Vol. 29","No. 5","pp. 47-50",1997,Oct.
"X. ZHANG, H. BEN, L. WANG and C.XU","A Fault Diagnosis Method Based on Circle Diagram for Electric Power Lines",,"Relay",,"Vol. 25","No. 3","pp. 19-",1997,June
"X. ZHANG, H. BEN and L. WANG","A New Fault Location Algorithm for Multi-branch Electric Power Lines",,"Journal of Harbin Institute of Technology",,"Vol. 29","No. 2","pp. 104-106",1997,Apr.
"H. BEN, X. ZHANG, C. ZHANG and Z. LIU","An Automatic Control System of Gold Ion Concentration in Gold Plating Bath",,"Plating and Environment Protection",,"Vol. 17","No. 1","pp. 26-28",1997,Feb.
"X. ZHANG, G. ZHAI and H. BEN","The Study of on-line Fault Detection and Diagnostics for Parallel-paired Multi-branch Electric Power Lines",,"Proceedings of the CSEE",,"Vol. 16","No. 6","pp. 427-429",1996,Dec.
"X. ZHANG, D. LIU and J. LI","The Investigation of Angles Servo-measuring System with Single Circular Arm for the Tri-axial Air Bearing Table",,"Journal of Astronautics",,"Vol. 17","No. 4","pp. 71-74",1996,Dec.
"X. ZHANG, H. BEN and G. ZAI","A New Method of On-line Detection and Diagnosis of Faults in Multiple-branch Electric Transmission Networks",,"Relay",,"Vol. 24","No. 4","pp. 39-41",1996,Aug.
"H. BEN, X. ZHANG and Z. LIU","Design of a Spectrophotometer of Automatic Flow Injection",,"Analytical Instruments",,,"No. 4","pp. 36-39",1996,Aug.
"X. ZHANG, N. QI and Y. JIN","The Optimal Shape Analysis of Intelligent Truss Structure",,"Journal of Harbin Institute of Technology",,"Vol. 27","No. 3","pp. 76-79",1995,June
"X. ZHANG and Y. JIN","Dynamics and Control for Five Axial Control Magnetic Bearings",,"Journal of Astronautics",,"Vol. 16","No. 1","pp. 79-83",1995,Mar.
"X. ZHANG and Y. JIN","Design of Control Systems for Five Axial Control Magnetic Bearings",,"Journal of Harbin Institute of Technology",,"Vol. 26","No. 2","pp. 41-47",1994,Apr.
"X. ZHANG and C. XU","Single Fault Diagnosis for Uniform Lines",,"Journal of Harbin Institute of Technology",,"Vol. 23","No. 6","pp. 70-73",1991,Dec.