論文

• Yoshihiro Morimoto, Dongjue He, Wataru Hijikata, Tadahiko Shinshi, Takahiro Nakai, Naoyuki Nakamura. Effect of high-frequency orbital and vertical oscillations of the laser focus position on the quality of the cut surface in a thick plate by laser beam machining, Precision Engineering, ELSEVIER, Vol. 40, pp. 112-123, Apr. 2015.  公式リンク  
  
• Dongjue He, Tadahiko Shinshi, Takahiro Nakai. Development of a maglev lens driving actuator for off-axis control and adjustment of the focal point in laser beam machining, Precision Engineering, Elsevier, Vol. 37, 2, pp. 255-264, Apr. 2013.
• Dongjue HE, Tadahiko SHINSHI, Xiaoyou ZHANG, Takashi YUZAWA, Tatsushi SATO. Improving the Speed of Small Deep Hole Electrical Discharge Machining by Combining Rotation of the Electrode with a Rapid-Response, Journal of Advanced Mechanical Design,Systems,and Manufacturing, JSME, Vol. 5, No. 4, p. 284-294, Oct. 2011.
• Dongjue He, Hiroki Morita, Xiaoyou Zhang, Tadahiko Shinshi, Takayuki Nakagawa, Tatsusi Sato, Hidetaka Miyake. Developement of a novel 5-DOF controlled maglev local actuator for high-speed electrical discharge machining, Precision Engineering, Elsevier, no. 34, pp. 453-460, July 2010.

国際会議発表 (査読有り)

• Tadahiko Shinshi, Yoshihiro Morimoto, Dongjue He, Wataru Hijikata, Takahiro Nakai, Naoyuki Nakamura. A MAGLEV LENS DRIVING ACTUATOR FOR HIGH-FREQUENCY AND MULTI-DOF LASER FOCUS POSITIONING IN LASER BEAM CUTTING, 2015 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), Proceedings of 2015 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2015), The Japan Society of Mechanical Engineers, pp. Mop-40, June 2015.
• Dongjue HE, Tadahiko SHINSHI, Xiaoyou ZHANG, Takashi YUZAWA, Tatsushi SATO. Micro Hole Electrical Discharge Machining Assisted by a Multi-DOF and High-Responce Maglev Local Actuator, The 6th International Conference on MicroManufacturing ICOMM/2011, The 6th International Conference on MicroManufacturing ICOMM/2011, No. 32, pp. 107-112, Mar. 2011.
• Dongjue He, Tadahiko Shinshi, Xiaoyou Zhang, Takashi Yuzawa, Tatsushi Sato. High Speed Electrical Discharge Machining Using a Combination of 5-DOF Controlled Maglev Actuator and Conventional EDM Machine, The Twenty-fifth Annual Meeting of The American Society for Precision Engineering, Proceedings of The Twenty-fifth Annual Meeting of The American Society for Precision Engineering, American Society for Precision Engineering, Nov. 2010.
• Dongjue He, Tadahiko Shinshi, Xiaoyou Zhang. Cooperative Control of a Maglev Local Actuator with a Conventional EDM Machine for High Speed Electrical Discharge Machining, ISMB12(The Twelfth International Symposium on Magnetic Bearings), Proceedings of the Twelfth International Symposium on Magnetic Bearings, Wuhan University of Technology Press, page 167-172, Aug. 2010.

国内会議発表 (査読有り)

• 進士 忠彦, 上山 吉崇, HeDongjue, 張 暁友, 湯澤 隆, 佐藤 達志. 多自由度磁気浮上アクチュエータを用いた高速・高精度放電加工の研究, 第14回国際工作機械技術者会議, 第14回国際工作機械技術者会議論文集（ポスターセッション論文抜粋版）, 日本工作機械工業会, p. 72-73, Oct. 2010.

国内会議発表 (査読なし・不明)

• He Dongjue, 森本 貴景, 進士 忠彦, 中井 孝洋, 藤川 周一. レーザ加工用高速・多自由度磁気浮上アクチュエータ, 2012年度精密工学会秋季大会, 2012年度精密工学会秋季大会学術講演会講演論文集, 精密工学会, p. 7-8, Sept. 2012.  公式リンク  
  
• 上山吉崇, HE Dongjue, 進士忠彦, 湯澤隆, 佐藤達志, 張暁友. 磁気軸受を用いた放電加工用回転電極の取り付け誤差補正, 2010年度精密工学会秋季大会, 2010年度精密工学会秋季大会学術講演会講演論文集, 社団法人 精密工学会, p. 901‐902, Sept. 2010.

学位論文

• High speed and multi-DOF maglev actuators for electrical discharge machining and laser beam machining,  Thesis,  Doctor (Engineering),  Tokyo Institute of Technology,  2012/09/25,   

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]