@book{CTT100419563,
  author = {M. Gakumazawa and M. Akiyama and C. Ishiyama and J. Hu and K. Takashima and Y. Higo and C. Nojiri},
  title = {Acoustic Emission Characteristics During Deformation of Poyether Ether Ketone(PEEK).},
  publisher = {Progress in Acoustic Emission IX},
  year = 1998,
}

@book{CTT100419562,
  author = {Y. Mine and Y. Morofuji and S. Ando and K. Takashima and H. Tonda and Y. Higo and P. Bowen},
  title = {Crack Growth Behavior Under Cyclic Loading in TiAl Based Aluminide with Lamellar Microstructure.},
  publisher = {Proc. Int. Symp. on Designing, Processing and Properties of Advanced Engineering Materials},
  year = 1998,
}

@book{CTT100419557,
  author = {K. Takashima and Y. Mine and S. Ando and H. Tonda and Y. Higo and P. Bowen},
  title = {Effects of Crystallographic Orientation on Fatigue Crack Growth in α-Titanium Single Crystals},
  publisher = {Advances in Fracture Research},
  year = 1997,
}

@book{CTT100419552,
  author = {K. Takashima and H. Tonda and P. Bowen},
  title = {Damage Assessment in a SiC Fibre Reinfoeced Ti Alloy by Acoustic Emission and Dynamic Mechanical Measurement.},
  publisher = {Titanium '95 : Science and Technology},
  year = 1996,
}

@book{CTT100419549,
  author = {K. Takashima and Y. Mine and S. Ando and H. Tonda and Y. Higo and P. Bowen},
  title = {Fatigue Crack Growth Behaviour of Titanium Single Crystals},
  publisher = {Fatigue '96(Proc. 6th Int. Conf. on Fatigue)},
  year = 1996,
}

@book{CTT100419554,
  author = {H. Ohtsuka and K. Takashima and G. B. Olson},
  title = {Acoustic Emission Characteristics During Martensitic Transformation in an Fe-Pt Alloy},
  publisher = {Progress in AE VII},
  year = 1996,
}

@book{CTT100419553,
  author = {K. Takashima and M. T. Cope and P. Bowen},
  title = {Fracture and Fatigue of a Ti┣D23┫D2Al Based Aluminide at Ambient and Elevated Temperatures.},
  publisher = {Titanium '95 : Science and Technology},
  year = 1996,
}

@book{CTT100430223,
  author = {高島和希},
  title = {機能性材料粉末の衝撃固化},
  publisher = {衝撃波ハンドブック},
  year = 1995,
}

@book{CTT100419546,
  author = {Y. Fukui and K. Takashima and N. Yamanaka and C. B. Ponton},
  title = {Analysis of Young's Modulus of an In-situ Al-Al┣D23┫D2Ni Functionally Gradient Material by Resonance.},
  publisher = {Proc. 3rd Int. Symp. on Structural and Functional Gradient Materials},
  year = 1995,
}

@book{CTT100419544,
  author = {K. Takashima and H. Tonda and P. Bowen},
  title = {Acoustic Emission and Damage Evolution in a Sic Fibre Reinforced Ti Alloy Composite.},
  publisher = {Progress in Acoustic Emission VII},
  year = 1994,
}

@book{CTT100419545,
  author = {K. Takashima and M. Nishida},
  title = {Acoustic Emission Characteristics During Phase Transformations in NiTiFe Shape Memory Alooys.},
  publisher = {Progress in Acoustics Emission VII},
  year = 1994,
}

@book{CTT100419540,
  author = {K. Takashima and K. M. Fox and P. Bowen},
  title = {Acoustic Emission Characteristics During Fracture and Fatigue of Continuous Fibre Reinforced Titanium Alloy Composites.},
  publisher = {Proc. 3rd Japan Int. SAMPE Symp.},
  year = 1993,
}

@book{CTT100419539,
  author = {J. G. Purcell and K. Takashima and P. Bowen},
  title = {Effects of Fibre Failure and Fibre Architecture in Notched Ti/SiC Cross-ply Laminates.},
  publisher = {Proc. 3rd Japan Int. SAMPE Symp.},
  year = 1993,
}

@book{CTT100419538,
  author = {M. Nishida and K. Kaneko and K. Takashima and K. Yamauchi and T. Inaba},
  title = {Static Rock Breaker Using TiNi Alloy with Reversible Shape Memory Effect.},
  publisher = {Proc. ICOMAT 92},
  year = 1992,
}

@book{CTT100419533,
  author = {K. Takashima and H. Tonda and M. Nishida and S.  Hagino and M. Suzuki},
  title = {Microstructural Modifications and Superconducting Properties of Explosively Compacted Oxide Superconductors.},
  publisher = {Shock-Wave and High-Strain-Rate Phenomena in Materials},
  year = 1992,
}

@book{CTT100419531,
  author = {K. Takashima and M. Moriguchi and H. Tonda},
  title = {Acoustic Emission Analysis During the Martensitic Transformation in an Fe-30%Ni Alloy.},
  publisher = {Progress in Acoustic Emission V},
  year = 1991,
}

@book{CTT100419530,
  author = {S. Hagino and M. Suzuki and T. Takeshita and K. Takashima and H. Tonda},
  title = {Microstructures and Superconducting Properties of Y-Ba-Cu and Bi-Sr-Ca-Cu Oxide Wire and Coils Prepared by the Explosive Compaction Technique.},
  publisher = {High Temperature Superconducting compounds : Processing & Related Properties},
  year = 1990,
}

@book{CTT100419529,
  author = {K. Takashima and H. Tonda and M. Nishida and S.  Hagino and M. Suzuki},
  title = {Preparation of Oxide Superconducting Coils by Explosive Compaction.},
  publisher = {Shock Waves in 1989},
  year = 1990,
}

@book{CTT100419525,
  author = {S. Hagino and M. Suzuki and T. Takeshita and K. Takashima and H. Tonda},
  title = {Microstructures and Superconducting Properties of Y-Ba-Cu Oxide Coils Prepared by the Explosive Compaction Technique.},
  publisher = {Advances in Superconductivity},
  year = 1989,
}

@book{CTT100419524,
  author = {K. Takashima and H. Tonda and H. Sakata and H. Mizuta and K. Kai and K. Takagi and Y. Higo and S. Nunomura},
  title = {Application of AE Transfer Function for Evaluating the Loosening in Artificial Knee Joint.},
  publisher = {Progress in Acoustic Emission IV},
  year = 1988,
}

@book{CTT100419516,
  author = {M. Ueki and K. Takashima and T. Kawasaki},
  title = {Effect of Al and Sn Additions on Hot Hardness of Copper.},
  publisher = {Proc. 26th Jpn. Cong. Mat. Sci.},
  year = 1983,
}

@book{CTT100419514,
  author = {K. Takashima and Y. Higo and S. Nunomura},
  title = {On Monitoring of the Crack Initiation Process Using an Acoustic Emission Frequency Analysis.},
  publisher = {Progress in Acoustic Emission},
  year = 1982,
}

@book{CTT100419515,
  author = {Y. Higo and K. Takashima and S. Nunomura},
  title = {Acoustic Emission During the Martensite Transformation in Austenitic Stainless Steel Single and Polycrystals.},
  publisher = {Progress in Acoustic Emmission},
  year = 1982,
}

@book{CTT100419513,
  author = {K. Takashima and N. W. Ringshall and Y. Higo and T. Obinata and T.Nakamura and S. Nunomura},
  title = {The Effect of Martensite on the Stress Corrosion Cracking of Austenitic Stainless Steel.},
  publisher = {Advances in Fracture},
  year = 1980,
}

@book{CTT100419512,
  author = {K. Takashima and Y. Higo and S. Nunomura},
  title = {Acoustic Emission During the Martensite Transformation of 304 Stainless Steel.},
  publisher = {Proc. 5th Int. AE Symp.},
  year = 1980,
}

@book{CTT100419511,
  author = {Y. Higo and K. Takashima and S. Nunomura and H. Nakamura and A. Wada},
  title = {On a New Real-Time Calibration Method for the Acoustic Emission Measurement System with Transducer, Specimen and Waveguide.},
  publisher = {Proc. 5th Int. AE Symp.},
  year = 1980,
}

@article{CTT100485336,
  author = {H. Ogi and S. Kai and T. Ichitsubo and M. Hirao and K. Takashima},
  title = {Elastic-Stiffness Coefficient of a Silicon Carbide Fibre at Elevated Temperatures: Acoustic Spectroscopy and Micromechanics Modeling},
  journal = {Phil. Mag.},
  year = 2003,
}

@article{CTT100492778,
  author = {G. P. Zhang and K. Takashima and M. Shimojo and Y. Higo},
  title = {Fatigue Behavior of Microsized Austenitic Stainless Steel Specimens},
  journal = {Mat. Lett},
  year = 2003,
}

@article{CTT100492790,
  author = {H. Ogi and S. Kai and T. Ichitsubo and M. Hirao and K. Takashima},
  title = {Elastic-Stiffness Coefficient of a Silicon Carbide Fibre at Elevated Temperatures: Acoustic Spectroscopy and Micromechanics Modeling},
  journal = {Phil. Mag},
  year = 2003,
}

@article{CTT100492791,
  author = {T. Inamura and K. Takashima and Y. Higo},
  title = {Crystallography of Nanometre-Sized α'-Martensite Formed at Intersections of Mechanical γ-Twins in an Austenitic Stainless Steel},
  journal = {Phil. Mag.},
  year = 2003,
}

@article{CTT100492792,
  author = {X. Li and B. Bhushan and K. Takashima and C-W. Baek and Y-K. Kim},
  title = {Mechanical Characterization of Micro/Nano Scale structures for MAMS/NEMS Applications using Nanoindentation Technique},
  journal = {Ultramicroscopy},
  year = 2003,
}

@article{CTT100492794,
  author = {S. Koyama and K. Nakai and K. Takashima and Y. Higo},
  title = {Fracture Toughness Tests of Thin Films for MEMS Applications},
  journal = {Trans. Mat. Res. Soc. Japan},
  year = 2003,
}

@article{CTT100492795,
  author = {T. Kamikawa and R. Tarumi and K. Takashima and Y. Higo},
  title = {Orientation Control of Nanocrystals in an Amorphous Alloy by Ion Beam Irradiation},
  journal = {Trans. Mat. Res. Soc. Japan},
  year = 2003,
}

@article{CTT100492796,
  author = {R. Tarumi and T. Kamikawa and K. Takashima and Y. Higo},
  title = {Formation of Oriented Nano-Sized Crystals in an Amorphous Alloy under Focused Ion Beam Irradiation},
  journal = {Trans. Mat. Res. Soc. Japan},
  year = 2003,
}

@article{CTT100492797,
  author = {K. Yamada and S. Watanabe and K. Takashima and Y. Higo},
  title = {Nanocrystallization of Surface Layer in a 316 Austenitic Stainless Steel by Ultrasonic Shot Peening},
  journal = {Trans. Mat. Res. Soc. Japan},
  year = 2003,
}

@article{CTT100492798,
  author = {T. Inamura and K. Takashima and Y. Higo},
  title = {Formation of Pitch-Related B.C.C Crystal at an Intersection of <112>{111} Shears in a F.C.C. Crystal},
  journal = {Trans. Mat. Res. Soc. Japan},
  year = 2003,
}

@article{CTT100492799,
  author = {R. Tarumi and K. Takashima and Y. Higo},
  title = {Crystallographic Features of Oriented Nanocrystals Induced by Focused-Ion-Beam Irradiation for an Amorphous Alloy},
  journal = {J. Appl. Phys},
  year = 2003,
}

@article{CTT100492800,
  author = {T. Tsuchiya and M. Hirata and N. Chiba and R. Udo and Y. Yoshitomi and T. Ando and K. Sato and K. Takashima and Y. Higo and Y. Saotome and H. Ogawa and K. Ozaki},
  title = {Cross Comparison of Thin Film Tensile-Testing Methods Examined with Single-crystal Silicon, Polysilicon, Nickel, and Titanium Films},
  journal = {Proc. of 16th IEEE Int. Micro Electro Mechanical Systems Conf. (MEMS 2003)},
  year = 2003,
}

@article{CTT100492801,
  author = {K. Kamikawa and R. Tarumi and K. Takashima and Y. Higo},
  title = {Formation of 3-Diemnsionally Oriented Nano-Sized Crystals in an Amorphous Alloy Under Ion Beam Irradiation},
  journal = {MRS Symp. Proc.},
  year = 2003,
}

@article{CTT100492803,
  author = {K. Takashima and S. Koyama and K. Nakai and Y. Higo},
  title = {Development of Fatigue Pre-Cracking Method into Micro-Sized Specimens for Measuring Fracture Toughness},
  journal = {MRS Symp. Proc},
  year = 2003,
}

@article{CTT100492804,
  author = {K. Yamada and K. Takashima and Y. Higo},
  title = {Preparation of Ultra-Fine Grained (γ+α')structure in the Surface Layer of a Type-316 Stainless Steel Using Ultrasonic Shot Peening},
  journal = {Proceedings of 7th Workshop on the Ultra-Steel},
  year = 2003,
}

@article{CTT100492805,
  author = {T.Inamura and K.Takashima and Y.Higo},
  title = {Crystallography of α’-Martensite Formed at Intersections of <112>{111}f Shears in an Austenitic Stainless Steel},
  journal = {Proceedings of 7th Workshop on the Ultra-Steel},
  year = 2003,
}

@article{CTT100492806,
  author = {K. Takashima and Y. Mine and S. Ando and H. Tonda and Y. Higo},
  title = {Effect of Crystallographic Orientation on Fatigue Crack Propagation in an Fe-3%Si Single Crystal},
  journal = {Proceedings of 7th Workshop on the Ultra-Steel},
  year = 2003,
}

@article{CTT100492810,
  author = {S. Ando and Y. Mine and H. Tonda and K. Takashima},
  title = {Fatigue Crack Growth Behavior in Titanium Single Crystals},
  journal = {Ti-2003(10th Titanium World Conference on Titanium)},
  year = 2003,
}

@article{CTT100492817,
  author = {S. Ando and Y. Mine and K. Takashima and H. Tonda},
  title = {Molecular Dynamics Simulation of Crack Propagation in Titanium},
  journal = {Ti-2003(10th Titanium World Conference on Titanium)},
  year = 2003,
}

@article{CTT100492818,
  author = {M. Hopcroft and T. Kramer and G. Kim and K. Takashima and Y. Higo and D. F. Moore and J. Brugger},
  title = {Micromechanical Testing of SU-8 Cantilevers},
  journal = {Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003)},
  year = 2003,
}

@article{CTT100492630,
  author = {K. Takashima and Y. Higo},
  title = {Fracture and Fatigue of Micro-Sized Specimens for MEMS/MST Applications},
  journal = {Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003},
  year = 2003,
}

@article{CTT100492631,
  author = {S. Sakai and K. Takashima and Y. Higo},
  title = {Subtle Non-Newtonian Property Measurement of Micro Fluids Using Squeeze Flow Rheometry},
  journal = {Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003)},
  year = 2003,
}

@article{CTT100492632,
  author = {T. P. Halford and K. Takashima and Y. Higo and P. Bowen},
  title = {The Fracture Toughness and Fatigue Properties of Micro Sized High Strength γ-TiAl},
  journal = {Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003},
  year = 2003,
}

@article{CTT100492640,
  author = {K. Takashima and Y. Higo},
  title = {Fracture and Fatigue in the Micrometer Scale},
  journal = {Proc. Int. Workshop on Materials Issues for MEMS/MST Devices},
  year = 2003,
}

@article{CTT100492641,
  author = {T. Kamikawa and R. Tarumi and K. Takashima and Y. Higo},
  title = {Formation of Self-Oriented Nanocrystals in an Amorphous Alloy under Focused-Ion-Beam Irradiation},
  journal = {IUMRS-ICAM2003 Abstracts},
  year = 2003,
}

@article{CTT100492642,
  author = {T. Inamura and K. Takashima and Y. Higo},
  title = {Morphology and Crystallography of Nano-Sized α'-Martensite in an Austenitic Stainless Steel},
  journal = {J. Phys., IV France},
  year = 2003,
}

@article{CTT100492643,
  author = {肥後矢吉 and 垂水竜一 and 高島和希},
  title = {Ni-Pアモルファス合金へのFIB照射によるNiナノ結晶相の方位配向制御},
  journal = {日本金属学会2003年春期（第132回）大会講演概要},
  year = 2003,
}

@article{CTT100492644,
  author = {高島和希 and 小山　聡 and 肥後矢吉 and T. P. Halford and P. Bowen},
  title = {マイクロサイズ試験片を用いたTiAl基金属間化合物の破壊試験},
  journal = {日本金属学会2003年春期（第132回）大会講演概要},
  year = 2003,
}

@article{CTT100492645,
  author = {高島和希 and 肥後矢吉},
  title = {MEMSデバイス用スマートマテリアルの破壊と疲労特性評価},
  journal = {日本金属学会宿題テーマ研究会「スマートマテリアル」},
  year = 2003,
}

@article{CTT100492646,
  author = {高島和希 and 肥後矢吉},
  title = {MEMSデバイス用マイクロスマートマテリアルの破壊と疲労特性評価},
  journal = {日本金属学会2003年秋期（第133回）大会講演概要},
  year = 2003,
}

@article{CTT100492648,
  author = {高島和希 and D. Rudinal and 小山　聡 and 肥後矢吉 and T. P. Halford and P. Bowen},
  title = {マイクロサイズTiAl基金属間化合物の破壊試験とその材料開発への応用},
  journal = {日本金属学会2003年秋期（第133回）大会講演概要},
  year = 2003,
}

@article{CTT100492649,
  author = {小山　聡 and 高島和希 and 肥後矢吉},
  title = {マイクロサイズ試験片における破壊靭性評価},
  journal = {日本金属学会2003年秋期（第133回）大会講演概要},
  year = 2003,
}

@article{CTT100492650,
  author = {D. Rudinal and S. Koyama and K. Takashima and Y. Higo and T. P. Halford and P. Bowen},
  title = {Fracture Tests for Micro-Sized TiAl Specimens Prepared from One Lamellar Colony},
  journal = {日本金属学会2003年秋期（第133回）大会講演概要},
  year = 2003,
}

@article{CTT100492651,
  author = {高島和希 and 肥後矢吉},
  title = {マイクロ試験片による鉄鋼材料構成微視組織の機械的性質評価法の開発},
  journal = {日本鉄鋼協会第２回「降伏強度と組織」研究会},
  year = 2003,
}

@article{CTT100492652,
  author = {高島和希 and 肥後矢吉},
  title = {マイクロ試験片による材料評価法},
  journal = {日本鉄鋼協会第２回「降伏強度と組織」研究会},
  year = 2003,
}

@article{CTT100627818,
  author = {Yoji Mine and Hidetoshi Fujisaki and Mitsuhiro Matsuda and Masao Takeyama and KAZUKI TAKASHIMA},
  title = {Micro-tension behaviour of TiAl polysynthetically twinned crystals with 0°- and 90°-orientated lamellae},
  journal = {Scripta Materialia},
  year = 2011,
}

@article{CTT100572110,
  author = {Masaaki Otsu and Junpei Sakurai and Seiichi Hata and Kazuki Takashima},
  title = {Laser Forming of Thin Film Metallic Glass},
  journal = {Journal of Solid Mechanics and Materials Engineering},
  year = 2009,
}

@article{CTT100507776,
  author = {YAKICHI HIGO and KAZUKI TAKASHIMA},
  title = {Mechanical testing of micro-sized specimens.},
  journal = {Netsu  Shori},
  year = 2007,
}

@article{CTT100508159,
  author = {Ryuichi Tarumi and Akira Shibata and Hirotsugu Ogi and Masahiko Hirao and Kazuki Takashima and Yakichi Higo},
  title = {Elastic　anisotropy of an Fe79Si12B9 amorphous alloy thin film studied by ultrasound spectroscopy},
  journal = {Jouanal of Applied Physics},
  year = 2007,
}

@article{CTT100507655,
  author = {G.P.Zhang and KAZUKI TAKASHIMA and YAKICHI HIGO},
  title = {Fatigue strength of small-scale type 304 stainless steel thin films},
  journal = {Mater. Sci. Eng., A,},
  year = 2006,
}

@article{CTT100507660,
  author = {Y.Kamibayashi and T.Kamikawa and KAZUKI TAKASHIMA and YAKICHI HIGO},
  title = {Patterning of self-oriented nanocrystals in an amorphous alloy under focused ion beam irradiation},
  journal = {J.Meta.Nanocryst. Mater.},
  year = 2005,
}

@article{CTT100507658,
  author = {T.P.Halford and KAZUKI TAKASHIMA and YAKICHI HIGO},
  title = {Fracture tests of microsized TiAl specimens},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = 2005,
}

@article{CTT100405126,
  author = {KAZUKI TAKASHIMA and Y.Higo},
  title = {Fatigue and Fracture of a Ni-P Amorphous Alloy Thin Film on the Micrometer Scale},
  journal = {Fatigue and Fracture of Engineering Materials and Structures},
  year = 2005,
}

@article{CTT100507659,
  author = {G.P.Zhang and KAZUKI TAKASHIMA and YAKICHI HIGO},
  title = {Size effects on deformation and fatigue behavior of a micron-sized stainless steel},
  journal = {Jinshu Xuebao},
  year = 2005,
}

@article{CTT100386360,
  author = {Y-H. Lee and KAZUKI TAKASHIMA and Y. Higo and D. Kwon},
  title = {Prediction of Stress Directionality from Pile-up Morphology around Remnant Indentation},
  journal = {Scripta Mater.},
  year = 2004,
}

@article{CTT100386359,
  author = {Timothy Paul Halford and Chiemi Ishiyama and Kazuki Takashima and Yakichi Higo},
  title = {The Effect of Processing for MEMS upon the Strength fo PMMA},
  journal = {53rd SPSJ Symposium on Macromplecules},
  year = 2004,
}

@article{CTT100386143,
  author = {H. Ogi and S. Kai and H. Ledbetter and R. Tarumi and M. Hirao and K. Takashima},
  title = {Titanium's High-Temperature Elastic Constants through the hcp-bcc Phase Transformation},
  journal = {Acta Mater.},
  year = 2004,
}

@article{CTT100386149,
  author = {Y-H. Lee and K. Takashima and Y. Higo and D. Kwon},
  title = {Prediction of Stress Directionality from Pile-up Morphology around Remnant Indentation},
  journal = { Scripta Mater.},
  year = 2004,
}

@article{CTT100386153,
  author = {T. Kamikawa and R. Tarumi and K. Takashima and Y. Higo},
  title = {Formation of Self-Oriented Nanocrystals in an Amorphous Alloy under Focused-Ion-Beam Irradiation},
  journal = {Trans. Mat. Res. Soc. Japan},
  year = 2004,
}

@article{CTT100386158,
  author = {S. Ando and Y. Mine and H. Tonda and K. Takashima},
  title = {Fatigue Crack Growth Behavior in Titanium Single Crystals},
  journal = {Proc. 10th Titanium World Conference on Titanium},
  year = 2004,
}

@article{CTT100386159,
  author = {S. Ando and Y. Mine and K. Takashima and H. Tonda},
  title = {Molecular Dynamics Simulation of Crack Propagation in Titanium},
  journal = {Proc. 10th Titanium World Conference on Titanium},
  year = 2004,
}

@article{CTT100386161,
  author = {K. Takashima and T. P. Halford and D. Rudinal and Y. Higo and P. Bowen},
  title = {Fracture Behavior of Micro-Sized Specimens Prepared from a TiAl Thin Foil},
  journal = {MRS Symp. Proceedings},
  year = 2004,
}

@article{CTT100386167,
  author = {高島和希 and 肥後矢吉},
  title = {マイクロサイズ試験片を用いた材料試験},
  journal = {熱処理},
  year = 2004,
}

@article{CTT100386168,
  author = {高島和希 and 肥後矢吉},
  title = {マイクロサイズ試験片を用いた材料評価試験},
  journal = {検査技術},
  year = 2004,
}

@article{CTT100386170,
  author = {高島和希},
  title = {マイクロサイズ材料試験片を用いた材料評価とその材料開発への応用},
  journal = {第119回超塑性研究会、鉄鋼協会フォーラム「超強加工を利用した材料創製と機能」、超微細粒材料研究会合同研究会、「強ひずみ・超微細粒材料研究の現状と展望」},
  year = 2004,
}

@article{CTT100386172,
  author = {高島和希},
  title = {MEMSデバイス用超微小材料の機械的性質評価},
  journal = {日本機械学会 第15回マイクロデバイス設計・製造・実装に関する研究会},
  year = 2004,
}

@article{CTT100386174,
  author = {高島和希},
  title = {ミクロンサイズ材料試験とそのMEMS開発への展開},
  journal = {第182回RISTフォーラム},
  year = 2004,
}

@article{CTT100386175,
  author = {垂水竜一 and 柴田　明 and 荻　博次 and 平尾雅彦 and 高島和希 and 肥後矢吉},
  title = {超音波共鳴法によるFe系アモルファス合金薄膜の弾性率評価},
  journal = {第134回日本金属学会春期大会講演概要},
  year = 2004,
}

@article{CTT100386176,
  author = {T. P. Halford and D. Rudinal and K. Takashima and Y. Higo and P. Bowen},
  title = {Fracture Toughness Properties of High Strength γ-TiAl on the Micro-Scale},
  journal = {第134回日本金属学会春期大会講演概要},
  year = 2004,
}

@article{CTT100386179,
  author = {久保田仁 and 小山　聡 and 高島和希 and 肥後矢吉},
  title = {アモルファス合金より作製した微小サイズ試験片の曲げ特性に及ぼすイオン注入の効果},
  journal = {第134回日本金属学会春期大会講演概要},
  year = 2004,
}

@article{CTT100386180,
  author = {小山　聡 and 高島和希 and 肥後矢吉},
  title = {単結晶シリコンより作製したミクロンサイズ試験片の破壊靭性評価},
  journal = {第134回日本金属学会春期大会講演概要},
  year = 2004,
}

@article{CTT100386181,
  author = {高島和希},
  title = {マイクロサイズ材料の破壊と疲労評価},
  journal = {第269回疲労部門委員会・第27回マイクロマテリアル部門委員会公開部門委員会研究討論会資料},
  year = 2004,
}

@article{CTT100386137,
  author = {Y-H Lee and K. Takashima and D. Kwon},
  title = {Micromechanical Analysis on Residual Stress-Induced Nanoindentation Depth Shifts in DLC Films},
  journal = {Scripta Mater.},
  year = 2004,
}

@article{CTT100386182,
  author = {中村英一 and 水田博志 and 前田崇文 and 工藤智志 and 高島和希},
  title = {アタッチメント式自動骨延長装置の片側仮骨延長法への応用},
  journal = {第17回日本創外固定・骨延長学会抄録集},
  year = 2004,
}

@article{CTT100386183,
  author = {H. Kubota and S. Koyama and K. Takashima and Y. Higo},
  title = {Effect of Ion-Implantation on the Mechanical Properties of a Zr-Ni Amorphous Alloy},
  journal = {Abstracts for the 11th Int. Symp. On Metastable, Mechanically Alloyed and Nanocrystalline Materials},
  year = 2004,
}

@article{CTT100386186,
  author = {Y. Kamibayashi and T. Kamikawa and K. Takashima and Y. Higo},
  title = {Pattrening of Self-Oriented Nanocrystals in an Amorphous Alloy under Focused Ion Beam Irradiation},
  journal = {Abstracts for the 11th Int. Symp. On Metastable, Mechanically Alloyed and Nanocrystalline Materials},
  year = 2004,
}

@article{CTT100386188,
  author = {柴田　明 and 垂水竜一 and 荻　博次 and 平尾雅彦 and 高島和希 and 肥後矢吉},
  title = {電磁超音波共鳴法およびRUS/レーザー法によるアモルファス合金薄膜の弾性率評価},
  journal = {第2回マイクロマテリアルシンポジウム講演論文集},
  year = 2004,
}

@article{CTT100386190,
  author = {小山　聡 and 高島和希 and 肥後矢吉},
  title = {ミクロンサイズ単結晶シリコンの破壊靭性評価},
  journal = {第2回マイクロマテリアルシンポジウム講演論文集},
  year = 2004,
}

@article{CTT100386193,
  author = {Y. Kamibayashi and R. Tarumi and K. Takashima and Y. Higo},
  title = {Patterning of Self-Oriented Nanocrystals in an Amorphous Alloy Under Focused Ion Beam},
  journal = { 第135回日本金属学会秋期大会講演概要},
  year = 2004,
}

@article{CTT100386197,
  author = {高島和希 and R. Rudinal and T. P. Halford and 肥後矢吉 and 竹山雅夫},
  title = {ラメラ構造を有するTiAl基金属間化合物のマイクロスケールにおける破壊試験},
  journal = {第135回日本金属学会秋期大会講演概要},
  year = 2004,
}

@article{CTT100386198,
  author = {Y-H. Lee and K. Takashima and Y. Higo and D. Kwon},
  title = {Assesment of Indentation Fracture Toughness Based on a Direct Measurement of Crack-Driving Residual Stress},
  journal = {Abstracts for Asian Pacific Conference for Fracture and Strength '04},
  year = 2004,
}

@article{CTT100386201,
  author = {S. Koyama and K. Takashima and Y. Higo},
  title = {Fracture Toughness Measurement of a Micro-Sized Single Crystal Silicon},
  journal = {Abstracts for Asian Pacific Conference for Fracture and Strength '04},
  year = 2004,
}

@article{CTT100386206,
  author = {T. P. Halford and D. Rudinal and K. Takashima and Y. Higo},
  title = {The Effect of Sample Preparation upon The Fracture Toughness of Microsized TiAl},
  journal = {Abstracts for Asian Pacific Conference for Fracture and Strength '04},
  year = 2004,
}

@article{CTT100386208,
  author = {K. Takashima and D. Rudinal and T. P. Halford and Y. Higo and M. Takeyama},
  title = {Micro-Fracture Toughness Testing of TiAl Based Alloys with a Fully Lamellar Structure},
  journal = {Abstracts for 2004 MRS Fall Meeting},
  year = 2004,
}

@article{CTT100386213,
  author = {T. P. Halford and K. Takashima and Y. Higo},
  title = {Fatigue Testing of Microsized Samples of γ-TiAl Based Materials},
  journal = {Abstracts for 2004 MRS Fall Meeting},
  year = 2004,
}

@article{CTT100386225,
  author = {高島和希 and D. Rudinal and T. P. Halford and 肥後矢吉},
  title = {マイクロサイズ試験片によるTiAl基金属間化合物の破壊靱性試験},
  journal = {第2回マイクロマテリアルシンポジウム講演論文集},
  year = 2004,
}

@article{CTT100386192,
  author = { 高島和希 and D. Rudinal and T. P. Halford and 肥後矢吉},
  title = {マイクロサイズ試験片によるTiAl基金属間化合物の破壊靱性試験},
  journal = {第2回マイクロマテリアルシンポジウム講演論文集},
  year = 2004,
}

@article{CTT100492659,
  author = {G. P. Zhang and KAZUKI TAKASHIMA and Masayuki SHIMOJO and Y. Higo},
  title = {Fatigue Behavior of Microsized Austenitic Stainless Steel Specimens},
  journal = {Mat. Lett.},
  year = 2003,
}

@article{CTT100507818,
  author = {Ryuichi Tarumi and K.Takashima and Y.Higo},
  title = {Formation of oriented nanocrystals in an amorphous alloy by focused-ion-beam irradiation},
  journal = {Applied Physics Letters},
  year = 2003,
}

@article{CTT100492854,
  author = {R. Tarumi and KAZUKI TAKASHIMA and Y. Higo},
  title = {Crystallographic Features of Oriented Nanocrystals Induced by Focused-Ion-Beam Irradiation for an Amorphous Alloy},
  journal = {J. Appl. Phys.},
  year = 2003,
}

@article{CTT100470986,
  author = {高島和希 and 肥後矢吉},
  title = {MEMS/NEMS材料における破壊と疲労特性評価},
  journal = {まてりあ},
  year = 2002,
}

@article{CTT100495811,
  author = {R. Tarui and K. Takashima and Y. Higo},
  title = {Formation of Oriented Nanocrystals in an Amorphous Alloy by Focused-Ion-Beam Irradiation},
  journal = {Applied Physics Letters},
  year = 2002,
}

@article{CTT100477861,
  author = {上川拓也 and 垂水竜一 and 高島和希 and 肥後矢吉},
  title = {Arイオンビーム照射を用いたNi-P系アモルファス合金への方位配向ナノ結晶形成},
  journal = {日本金属学会講演概要},
  year = 2002,
}

@article{CTT100477860,
  author = {垂水竜一 and 高島和希 and 肥後矢吉},
  title = {集束Gaイオン照射によるNi-P系アモルファス合金への方位配向ナノ結晶形成とその照射角度依存性},
  journal = {日本金属学会講演概要},
  year = 2002,
}

@article{CTT100477857,
  author = {小山聡 and 中井勝久 and 高島和希 and 肥後矢吉},
  title = {ミクロンサイズ試験片への疲労予き裂導入と破壊靱性試験},
  journal = {日本金属学会講演概要},
  year = 2002,
}

@article{CTT100477853,
  author = {稲邑朋也 and 高島和希 and 肥後矢吉},
  title = {オーステナイトステンレス鋼におけるPitsch方位関係を有するナノサイズマルテンサイトの形成},
  journal = {日本金属学会講演概要},
  year = 2002,
}

@article{CTT100477849,
  author = {渡辺智 and 山田和也 and 高島和希 and 肥後矢吉},
  title = {微小材料試験による材料表面層ナノ結晶組織の機械的性質評価},
  journal = {日本金属学会講演概要},
  year = 2002,
}

@article{CTT100477838,
  author = {山田和也 and 渡辺智 and 高島和希 and 肥後矢吉},
  title = {超音波ショットピーニングによる材料表面のナノ結晶化},
  journal = {日本金属学会講演概要},
  year = 2002,
}

@article{CTT100477836,
  author = {稲邑朋也 and 高島和希 and 肥後矢吉},
  title = {オーステナイトステンレス鋼中の変形双晶交点に形成されたナノサイズ・マルテンサイトの高分解能電子顕微鏡観察},
  journal = {第18回分析電子顕微鏡討論会予稿集},
  year = 2002,
}

@article{CTT100477834,
  author = {垂水竜一 and 高島和希 and 肥後矢吉},
  title = {FIB照射によるアモルファス中への方位配向ナノ結晶形成},
  journal = {第18回分析電子顕微鏡討論会予稿集},
  year = 2002,
}

@article{CTT100476786,
  author = {甲斐悟 and 荻博次 and 市坪哲 and 平尾雅彦 and 高島和希},
  title = {高温におけるSiCf/Ti複合材料の弾性定数テンソルの測定と損傷評価},
  journal = {Proceeding of 2002 Annual Meeting of JSME/MMD},
  year = 2002,
}

@article{CTT100471347,
  author = {Y. Higo and K. Takashima},
  title = {Fracture and Fatigue of Microelements for Micro/Medical Applications},
  journal = {Proceeding of 2002 Annual Meeting of JSME/MMD},
  year = 2002,
}

@article{CTT100471346,
  author = {Y. Higo and T. Inamura and M. Shimojo and K. Takashima},
  title = {A New Fatigue Life Extension Method Using Nano-Sized Martensites in Austenitic Stainless Steels},
  journal = {Abstract for 2002 TMS Fall Meeting},
  year = 2002,
}

@article{CTT100471345,
  author = {肥後矢吉 and 高島和希},
  title = {マイクロ/ナノテクノロジーを支える評価. 計測技術},
  journal = {機械と工具},
  year = 2002,
}

@article{CTT100471070,
  author = {高島和希 and 肥後矢吉},
  title = {マイクロマテリアルの破壊靭性評価},
  journal = {日本機械学会関西支部第77期定時総会講演会講演論文集},
  year = 2002,
}

@article{CTT100471064,
  author = {高島和希 and 肥後矢吉},
  title = {Fe-3%Si合金単結晶における疲労き裂伝播の方位依存性 },
  journal = {日本鉄鋼協会「材料の組織と破壊特性」自主フォーラム成果報告会予稿集},
  year = 2002,
}

@article{CTT100471058,
  author = {稲邑朋也 and 高島和希 and 肥後矢吉},
  title = {オーステナイト鋼中の変形双晶交点におけるナノサイズ・マルテンサイトの形成},
  journal = {日本金属学会第130回春期大会講演概要},
  year = 2002,
}

@article{CTT100471056,
  author = {垂水竜一 and 佐藤恵 and 高島和希 and 肥後矢吉},
  title = {Ni-P系アモルファス合金の集束イオンビーム照射による方位配向ナノ結晶化},
  journal = {日本金属学会第130回春期大会講演概要},
  year = 2002,
}

@article{CTT100471052,
  author = {中井勝久 and 高島和希 and 肥後矢吉},
  title = {微細結晶粒SUS304ステンレス鋼のマイクロサイズ試験片における曲げ疲労挙動},
  journal = {第46回日本学術会議材料連合講演会講演論文集 },
  year = 2002,
}

@article{CTT100471049,
  author = {小山聡 and 中井勝久 and 高島和希 and 肥後矢吉},
  title = {ミクロンサイズ試験片の破壊靭性試験における疲労予き裂の導入},
  journal = {第46回日本学術会議材料連合講演会講演論文集},
  year = 2002,
}

@article{CTT100471028,
  author = {荻博次 and 下池剛 and 高島和希 and 平尾雅彦},
  title = {Ni-Pアモルファス合金薄膜の異方性弾性率テンソルの測定と膜組織のマイクロメカニックス評価, },
  journal = {Proceeding of 2002 Annual Meeting of JSME/MMD},
  year = 2002,
}

@article{CTT100471026,
  author = {K. Takashima and R. Tarumi and Y. Higo},
  title = {Fracture Behavior of Micro-Sized Specimens Prepared from an Amorphous Alloy Thin Film at Ambient and Elevated Temperatures},
  journal = {MRS Symp. Proc.},
  year = 2002,
}

@article{CTT100471023,
  author = {T. Inamura and K. Takashima and Y. Higo},
  title = {Morphology and Crystallography of Nano-Sized a-Martensite in an Austenitic Stainless Steel},
  journal = {Abstract for Int. Conf. on Martensitic Transformation},
  year = 2002,
}

@article{CTT100471010,
  author = {H. Ogi and S. Kai and T. Ichitsubo and M. Hirao and K. Takashima},
  title = {Elastic Stiffness Tensor of a Single SiC Fiber at Elevated Temperatures},
  journal = {11th Int. Symp. on Nondestructive Characterization of Materials},
  year = 2002,
}

@article{CTT100471008,
  author = {H. Ogi and N. Nakamura and H. Hirao and K. Takashima},
  title = {Elastic Anisotropy of Thin Films: Acoustic Spectroscopy and Micromechanics Modeling},
  journal = {Gordon Research Conf. on Thin Film Mechanical Behavior},
  year = 2002,
}

@article{CTT100471005,
  author = {K. Takashima and Y. Higo},
  title = {Results of Round Robin tests for Ni Specimens},
  journal = {Proc. 2nd Workshop on Standardization for Micromachine/MST/MEMS},
  year = 2002,
}

@article{CTT100471002,
  author = {K. Takashima and Y. Higo},
  title = {Tensile Testing of Thin Films for Micromachine Applications Using Micro-Gluing Grip Technique},
  journal = {Proc. 2nd Workshop on Standardization for Micromachine/MST/MEMS},
  year = 2002,
}

@article{CTT100470997,
  author = {K. Nakai and S. Koyama and K. Takashima and Y. Higo},
  title = {Evaluation of Acoustic Emission During Fracture Toughness Test of Micro-Sized Specimens},
  journal = {Proc. 6th Far-East Conf. on Nondestructive Testing},
  year = 2002,
}

@article{CTT100470996,
  author = {K. Takashima and Y. Higo},
  title = {A New Evaluation Method of Fracture Toughness for Micro-Sized Specimens},
  journal = {Abstract for 2002 TMS Fall Meeting},
  year = 2002,
}

@article{CTT100470992,
  author = {R. Tarumi and T. Kamikawa and K. Takashima and Y. Higo},
  title = {Formation of 3-Dimensionally Oriented Nano-Sized Crystals in an Amorphous Alloy Under Ion Beam Irradiation},
  journal = {Abstract for 2002 MRS Fall Meeting},
  year = 2002,
}

@article{CTT100470989,
  author = {K. Takashima and S. Koyama and K. Nakai and Y. Higo},
  title = {Development of Fatigue Pre-Cracking Method into Micro-Sized Specimens for Measuring Fracture Toughness},
  journal = {Abstract for 2002 MRS Fall Meeting},
  year = 2002,
}

@article{CTT100470978,
  author = {H. Ogi and G. Shimoike and M. Hirao and K. Takashima and Y. Higo},
  title = {Anisotropic Elastic-Stiffness Coefficients of an Amorphous Ni-P Film},
  journal = {J. Appl. Phys.},
  year = 2002,
}

@article{CTT100470976,
  author = {H. Ogi and G. Shimoike and K. Takashima and M. Hirao},
  title = {Measurement of Elastic Tensor of an Anisotropic Thin Film by Electromagnetic Acoustic Resonance},
  journal = {Ultrasonics},
  year = 2002,
}

@article{CTT100456440,
  author = {M. Shimojo and T. Inamura and T. H. Myeong and K. Takashima and Y. Higo},
  title = {Formation of Nano-Sized Martensite Particles in Stainless Steels},
  journal = {Metall. Mater. Trans., A.},
  year = 2001,
}

@article{CTT100463002,
  author = {Y. Mizutani and M. Shimojo and K. Takashima and Y. Higo},
  title = {Size Effect of Corrosion Fatigue Properties of Micro-Sized 304 Austenitic Stainless Steel Specimens},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100463001,
  author = {T. Inamura and M. Shimojo and K. Takashima and Y. Higo},
  title = {Fatigue Life Extension of Austenitic Stainless Steel Using Nano-Sized Martensites Formed at Intersections of Dislocations},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100462729,
  author = {S. Ando and K. Takashima and H. Tonda},
  title = {Molecular Dynamics Similation of Crack Propagation in HCP Crystals},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100462727,
  author = {G. P. Zhang and K. Takashima and M. Shimojo and Y. Higo},
  title = {Fatigue Behavior of a Micro-Sized Austenitic Stainless Steel with Fine Grains},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100462538,
  author = {K. Takashima and Y. Higo and M. V. Swain},
  title = {Fracture Toughness Tests for Micro-Sized Specimens},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100462537,
  author = {K. Takashima and Y. Higo and M. V. Swain},
  title = {Fatigue Crack Growth Behaviour of Micro-Sized Specimens Prepared from Amorphous Alloy Thin Films},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100462536,
  author = {K. Takashima and Y. Higo},
  title = {Fracture and Fatigue Crack Growth for Micro-Sized Specimens},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100455920,
  author = {G. P. Zhang and K. Takashima and Y. Higo},
  title = {Fatigue Damage of a Micro-Sized Austenitic Stainless Steel with Fine Grains},
  journal = {日本金属学会講演概要},
  year = 2001,
}

@article{CTT100455923,
  author = {垂水竜一 and 小倉暁生 and 高島和希 and 肥後矢吉},
  title = {応力場を利用した非晶質金属中へのナノ結晶相析出およびその方位制御},
  journal = {日本金属学会講演概要},
  year = 2001,
}

@article{CTT100463003,
  author = {R. Tarumi and M. Shimojo and K. Takashima and Y. Higo},
  title = {Temperature Dependence of Fracture Toughness in a Micro-Siozed Ni-P Amorphous Alloy},
  journal = {Advances in Fracture Research, Proc. ICF10 (CD-ROM)},
  year = 2001,
}

@article{CTT100456437,
  author = {高島和希 and 肥後矢吉 and 杉浦眞佐 and M. V. Swain},
  title = {MEMS用ミクロンサイズ超微小材料に対する疲労および破壊靭性評価試験装置の開発},
  journal = {まてりあ},
  year = 2001,
}

@article{CTT100454542,
  author = {K. Takashima and Y. Higo and S. Sugiura and M. Shimojo},
  title = {Fatigue Crack Growth Behavior of Micro-Sized Specimens Prepared from an Electroless Plated Ni-P Amorphous Alloy Thin Film},
  journal = {Materials Transactions},
  year = 2001,
}

@article{CTT100456698,
  author = {垂水竜一 and 高島和希 and 肥後矢吉},
  title = {アモルファス合金の応力誘起ナノ結晶化とその構造解析},
  journal = {日本金属学会講演概要},
  year = 2001,
}

@article{CTT100456699,
  author = {中井勝久 and 水谷有里 and 高島和希 and 肥後矢吉},
  title = {微細結晶粒304ステンレス鋼のマイクロサイズ試験片における曲げ疲労過程の引張側と圧縮側の相違},
  journal = {日本金属学会講演概要},
  year = 2001,
}

@article{CTT100456702,
  author = {甲斐悟 and 荻博次 and 市坪哲 and 平尾雅彦 and 高島和希},
  title = {高温におけるSiCf/Ti複合材とSiC繊維の弾性定数テンソル},
  journal = {日本金属学会講演概要},
  year = 2001,
}

@article{CTT100456713,
  author = {肥後矢吉 and 高島和希 and 中井勝久 and 水谷有里 and 稲葉秀弘 and 杉浦眞佐},
  title = {ナノインデンテーション用AEセンサーの開発と薄膜評価への応用},
  journal = {第13回AE総合コンファレンス論文集},
  year = 2001,
}

@article{CTT100456716,
  author = {中井勝久 and 水谷有里 and 高島和希 and 肥後矢吉},
  title = {ミクロンサイズ試験片の破壊試験に伴うAE評価},
  journal = {第13回AE総合コンファレンス論文集},
  year = 2001,
}

@article{CTT100456717,
  author = {渡辺智 and 稲邑朋也 and 高島和希 and 肥後矢吉},
  title = {AE法による結晶粒超微細化用ショットピーニング装置の高効率条件の決定},
  journal = {第13回AE総合コンファレンス論文集},
  year = 2001,
}

@article{CTT100456721,
  author = {K. Takashima and A. Ogura and Y. Ichikawa and Y. Higo},
  title = {Anisotropic Fracture Behavior of Ni-P Amorphous Alloy Thin Films},
  journal = {Materials Science for the 21st Century},
  year = 2001,
}

@article{CTT100456722,
  author = {G. P. Zhang and K. Takashima and Y. Higo},
  title = {Deformation Mechanisms of Micro-Sized Austenitic Stainless Steel Specimens with Fine Grains},
  journal = {Materials Science for the 21st Century},
  year = 2001,
}

@article{CTT100456724,
  author = {Y. Mizutani and Y. Higo and Y. Ichikawa and A. Morita and K. Takashima and M. V. Swain},
  title = {Corrosion Fatigue Behavior of Micro-Sized Specimens},
  journal = {Materials Science for the 21st Century},
  year = 2001,
}

@article{CTT100456729,
  author = {A. Ogura and R. Tarumi and M. Shimojo and K. Takashima and Y. Higo},
  title = {Control of Nanocrystalline Orientation Using the Application os a Stress Field in an Amorphous Alloy},
  journal = {Applied Physics Letters},
  year = 2001,
}

@article{CTT100456856,
  author = {G. P. Zhang and K. Takashima and M. Shimojo and Y. Higo},
  title = {Deformation Mechanisms of a Micro-Sized Austenitic Stainless Steel with Fine Grains},
  journal = {MRS Symp. Proc.},
  year = 2001,
}

@article{CTT100456862,
  author = {Y. Mizutani and Y. Higo and Y. Ichikawa and A. Morita and K. Takashima and M. V. Swain},
  title = {Corrosion Fatigue Tests of Micro-Sized Specimens},
  journal = {MRS Symp. Proc.},
  year = 2001,
}

@article{CTT100456863,
  author = {K. Takashima and A. Ogura and Y. Ichikawa and Y. Higo},
  title = {Anisotropic Fracture Behavior of Electroless Deposited Ni-P Amorphous Alloy Thin Films},
  journal = {MRS Symp. Proc.},
  year = 2001,
}

@article{CTT100460139,
  author = {K. Takashima and M. Shimojo and Y. Higo and M. V. Swain},
  title = {Fracture Behavior of Micro-Sized Specimens with Fatigue Pre-Crcak Prepared from a Ni-P Amorphous Alloy Thin Film},
  journal = {ASTM Standarad Technical Publication},
  year = 2001,
}

@article{CTT100460140,
  author = {K. Takashima and M. Shimojo and Y. Higo and M. V. Swain},
  title = {Fatigue Crack Growth of a Ni-P Amorphous Alloy Thin Film},
  journal = {ASTM Standard Technical Publication},
  year = 2001,
}

@article{CTT100460141,
  author = {高島和希 and 肥後矢吉},
  title = {ミクロンサイズ材料における破壊と疲労},
  journal = {電子デバイス／微小構造の強度信頼性},
  year = 2001,
}

@article{CTT100460147,
  author = {K. Takashima and R. Tarumi and Y. Higo},
  title = {Fracture Behavior of Micro-SIzed Specimens Prepared from an Amorphous Alloy Thin Film at Ambient and Elevated Temperatures},
  journal = {Abstracts of MRS 2001 Fall Meeting},
  year = 2001,
}

@article{CTT100456694,
  author = {佐藤恵 and 垂水竜一 and 高島和希 and 肥後矢吉},
  title = {アモルファス合金の応力誘起ナノ結晶化とその析出条件},
  journal = {日本金属学会講演概要},
  year = 2001,
}

@article{CTT100456668,
  author = {T. Inamura and M. Shimojo and K. Takashima and Y. Higo},
  title = {Extension of High Cycle Fatigue Life by the Formation of Nano-Sized Martensite Particles at Intersections of Dislocations in an Austenitic Stainless Steel},
  journal = {MRS Symp. Proc.},
  year = 2001,
}

@article{CTT100456661,
  author = {A. Ogura and M. Sato and R. Tarumi and M. Shimojo and K. Takashima and Y. Higo},
  title = {Formation of Nano-Sized Crystals During Plastic Deformation in Amorphous Alloys},
  journal = {MRS Symp. Proc.},
  year = 2001,
}

@article{CTT100456660,
  author = {R. Tarumi and A. Ogura and M. Shimojo and K. Takashima and Y. Higo},
  title = {Molecular Dynamics Simulation of Nano-Sized Crystallization During Plastic Deformation in an Amorphous Metal},
  journal = {MRS Symp. Proc.},
  year = 2001,
}

@article{CTT100456614,
  author = {H. Ogi and G. Shimoike and M. Hirao and K. Takashima and H. Ledbetter},
  title = {Elastic-Stiffness Tensor of Metal-Matrix Composites Measured by Electromagnetic Acoustic Resonance},
  journal = {Nondestructive Characterization of Materials},
  year = 2001,
}

@article{CTT100456482,
  author = {高島和希 and 肥後矢吉 and 杉浦眞佐 and M. V. Swain},
  title = {ミクロンサイズの超微小電子・機械部品用材料評価試験装置},
  journal = {トライボロジー},
  year = 2001,
}

@article{CTT100456476,
  author = {K. Takashima and R. Tarumi and A. Ogura and Y. Higo},
  title = {Fracture Behavior of an Amorphous Alloy Thin Film},
  journal = {2001 Mechanics and Materials Summer Conference},
  year = 2001,
}

@article{CTT100456442,
  author = {H. Ogi and H. Ledbetter and K. Takashima and G. Shimoike and M. Hirao},
  title = {Elastic Properties of a Crossply SiCf/Ti Composite at Elevated Temperatures},
  journal = {Metall. Mater. Trans., A.},
  year = 2001,
}

@article{CTT100455278,
  author = {高島和希 and 肥後矢吉 and 峯洋二 and 頓田英機},
  title = {Fe-3%Si合金単結晶における疲労き裂伝播の結晶方位依存性},
  journal = {材料とプロセス},
  year = 2001,
}

@article{CTT100455918,
  author = {水谷有里 and 肥後矢吉 and 市川祐介 and 森田敦 and 高島和希},
  title = {ミクロンサイズ試験片における腐食疲労挙動},
  journal = {日本金属学会講演概要},
  year = 2001,
}

@article{CTT100438678,
  author = {K.Takashima and M.Shimojo and Y.Higo and M. V. Swain},
  title = {Fatigue crack growth of a Ni-P amorphous alloy thin film},
  journal = {Abstracts for Symp. on Mechanical Properties of Structural Films},
  year = 2000,
}

@article{CTT100438662,
  author = {G. P. Zhang and K. Takashima and M. Shimojo and Y. Higo},
  title = {Deformation Behavior of Micro-Sized Austenitic Stainless Steel Specimens},
  journal = {第１回マイクロマテリアルシンポジウム講演論文集},
  year = 2000,
}

@article{CTT100438663,
  author = {小倉暁生 and 市川祐介 and 下条雅幸 and 高島和希 and 肥後矢吉},
  title = {Ni-P系アモルファス合金薄膜の破壊挙動},
  journal = {第１回マイクロマテリアルシンポジウム講演論文集},
  year = 2000,
}

@article{CTT100438664,
  author = {佐藤恵 and 小倉暁生 and 垂水竜一 and 下条雅幸 and 高島和希 and 肥後矢吉},
  title = {アモルファス金属の塑性変形に伴う結晶化と熱的安定性の関係},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438665,
  author = {高島和希 and 肥後矢吉},
  title = {マイクロマテリアルの破壊と疲労特性},
  journal = {日本金属学会シンポジウム「微細材料の力学特性と信頼性」予稿},
  year = 2000,
}

@article{CTT100438666,
  author = {高島和希 and 肥後矢吉 and 杉浦眞佐},
  title = {マイクロマテリアルにおける破壊特性評価},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438667,
  author = {垂水竜一 and 下条雅幸 and 高島和希 and 肥後矢吉},
  title = {分子動力学法によるNi基非晶質金属の塑性変形に伴う結晶化過程の解析},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438668,
  author = {張廣平 and 高島和希 and 下条雅幸 and 肥後矢吉},
  title = {Deformation behavior of a fine-grained austenitic stainless steel using micro-cantilever beam bending test},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438669,
  author = {水谷有里 and 肥後矢吉 and 市川祐介 and 森田敦 and 高島和希},
  title = {マイクロサイズ試験片に対する腐食疲労試験装置の開発},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438670,
  author = {森田敦 and 市川祐介 and 下条雅幸 and 高島和希 and 肥後矢吉 and 杉浦眞佐},
  title = {ミクロンサイズ試験片に対する単軸引張試験装置の開発},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438671,
  author = {市川祐介 and 前川智 and 高島和希 and 下条雅幸 and 肥後矢吉},
  title = {ミクロンサイズの超微小試験片における破壊靭性評価},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438672,
  author = {垂水竜一 and 小倉暁生 and 下条雅幸 and 高島和希 and 肥後矢吉},
  title = {アモルファス金属の塑性変形に伴う結晶化過程の分子動力学シミュレーション},
  journal = {日本機械学会2000年度年次大会講演論文集},
  year = 2000,
}

@article{CTT100438673,
  author = {前川智 and 高島和希 and 下条雅幸 and 肥後矢吉 and M.V.Swain},
  title = {ミクロンサイズのアモルファス合金試験片における疲労き裂伝播挙動},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100438674,
  author = {G.P.Zhang and K.Takashima and M.Shimojo and Y.Higo},
  title = {Deformation behavior of a fine grained 304 stainless steel using micro-sized specimens},
  journal = {Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000)},
  year = 2000,
}

@article{CTT100438675,
  author = {G.P.Zhang and K.Takashima and M.Shimojo and Y.Higo},
  title = {Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains},
  journal = {MRS 2000 fall meeting Abst.},
  year = 2000,
}

@article{CTT100438676,
  author = {H.Ogi and G.Shimoike and M.Hirao and K.Takashima and H.Ledbetter},
  title = {Electromagnetic acoustic resonance to measure elastic-stiffness tensor of metal-matrix composites},
  journal = {Proc. 10th Iketani Conf. on Materials Research toward the 21st Century},
  year = 2000,
}

@article{CTT100438677,
  author = {K.Takashima and A.Ogura and Y.Ichikawa and M.Shimojo and Y.Higo},
  title = {Anisotropic fracture behavior of electroless deposited Ni-P amorphous alloy thin films},
  journal = {MRS 2000 fall meeting Abst.},
  year = 2000,
}

@article{CTT100438679,
  author = {K.Takashima and S.Maekawa and Y.Ichikawa and M.Shimojo and Y.Higo and M.V.Swain},
  title = {Fracture and fatigue behavior of micro-sized amophous alloy specimens},
  journal = {Proc. Micro Systems: Mechanics and Measurements Symp., (Society for Experimental Mechanics)},
  year = 2000,
}

@article{CTT100438680,
  author = {A.Ogura and Y.Ichikawa and M.Shimojo and K.Takashima and Y.Higo and M.V.Swain},
  title = {Fracture toughness measurements of micro-sized Ni-P amorphous alloy specimens},
  journal = {Proc. 3rd Int. Conf. on MicroMaterials (MicroMat 2000)},
  year = 2000,
}

@article{CTT100438681,
  author = {M.Sato and A.Ogura and R.Tarumi and M.Shimojo and K.Takashima and Y.Higo},
  title = {Formation of nano-sized crystals during plastic deformation in amorphous alloys},
  journal = {MRS 2000 fall meeting Abst.},
  year = 2000,
}

@article{CTT100438682,
  author = {K.Takashima and S.Maekawa and Y.Ichikawa and M.Shimojo and Y.Higo and S.Sugiura and M.V.Swain},
  title = {Fatigue life and crack growth properties of micro-sized Ni-P amorphous alloy specimens},
  journal = {Proc. 3rd Int. Conf. on MicroMaterials (MicroMat 2000)},
  year = 2000,
}

@article{CTT100438683,
  author = {R.Tarumi and A.Ogura and M.Shimojo and K.Takashima and Y.Higo},
  title = {Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--},
  journal = {Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000)},
  year = 2000,
}

@article{CTT100438684,
  author = {R.Tarumi and A.Ogura and M.Shimojo and K.Takashima and Y.Higo},
  title = {Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal},
  journal = {MRS 2000 fall meeting Abst.},
  year = 2000,
}

@article{CTT100438685,
  author = {S.Maekawa and K.Takashima and M.Shimojo and Y.Higo and M.V.Swain},
  title = {Fatigue properties for micro-sized Ni-P amorphous alloy specimens},
  journal = {Mat. Res. Soc. Symp. Proc.},
  year = 2000,
}

@article{CTT100438686,
  author = {T.Inamura and M.Shimojo and K.Takashima and Y.Higo},
  title = {Extension of high cycle fatigue life by the formation of nano-sized martensite particles at intersections of dislocations in an austenitic stainless steel},
  journal = {MRS 2000 fall meeting Abst},
  year = 2000,
}

@article{CTT100438687,
  author = {T.Inamura and S.Nagano and M.Shimojo and K.Takashima and Y.Higo},
  title = {Detection of pre-martensitic transformation phenomena in austenitic stainless steels using an acoustic emission technique},
  journal = {Progress in Acoustic Emission X (Proc.15th Int. AE Sympo.)},
  year = 2000,
}

@article{CTT100438688,
  author = {Y.Higo and K.Takashima and M.Shimojo and C.Ishiyama},
  title = {Fracture and fatigue properties of micro-sized specimens for bio-medical applications},
  journal = {International Workshop on Bio-integrated Materials & Tissue Engineering},
  year = 2000,
}

@article{CTT100438689,
  author = {Y.Higo and K.Takashima and M.Shimojo and S.Sugiura and B.Pfister and M.V.Swain},
  title = {Fatigue testing machine of micro-sized specimens for MEMS applications},
  journal = {Mat. Res. Soc. Symp. Proc.},
  year = 2000,
}

@article{CTT100438690,
  author = {Y.Higo and K.Takashima and M.Shimojo and S.Sugiura and M.V.Swain},
  title = {New equipment for evaluating performance of microelements on MEMS},
  journal = {proc. 3rd Int. Conf. on MicroMaterials (MicroMat 2000)},
  year = 2000,
}

@article{CTT100438691,
  author = {Y.Higo and K.Takashima and M.Shimojo and S.Sugiura and M.V.Swain},
  title = {Fracture behaviour of micro-sized specimens prepared from an electroless deposited Ni-P alloy amorphous thin film},
  journal = {Structural Integrity and Fracture Symposium (SIF2000)},
  year = 2000,
}

@article{CTT100438692,
  author = {Y.Ichikawa and S.Maekawa and K.Takashima and M.Shimojo and Y.Higo and M.V.Swain},
  title = {Fracture behavior of micro-sized Ni-P amorphous alloy specimens},
  journal = {Mat. Res. Soc. Symp. Proc.},
  year = 2000,
}

@article{CTT100438693,
  author = {Y.Mizutani and Y.Higo and Y.Ichikawa and A.Morita and K.Takashima},
  title = {Corrosion fatigue tests of micro-sized specimens},
  journal = {MRS 2000 fall meeting Abst.},
  year = 2000,
}

@article{CTT100438694,
  author = {H.Ogi and M.L.Dunn and K.Takashima and H.Ledbetter},
  title = {Elastic Properties of a Unidirectional SiCp/Ti Composite - Acoustic Resonance Measurements and Micromechanics predictions},
  journal = {J. Appl. Phys.},
  year = 2000,
}

@article{CTT100438695,
  author = {R.Tarumi and A.Ogura and M.Shimojo and K.Takashima and Y.Higo},
  title = {Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation},
  journal = {Jpn. J. Appl. Phys.},
  year = 2000,
}

@article{CTT100438696,
  author = {下池剛 and 荻博次 and 高島和希 and 平尾雅彦},
  title = {高温におけるSiCf/Tiクロスプライ複合材料の弾性定数テンソルの測定},
  journal = {日本金属学会誌},
  year = 2000,
}

@article{CTT100443027,
  author = {荻博次 and M. Dunn and 高島和希 and H. Leadbetter},
  title = {SiC繊維の弾性率テンソル測定},
  journal = {日本金属学会講演概要},
  year = 2000,
}

@article{CTT100421993,
  author = {KAZUKI TAKASHIMA},
  title = {Damage evaluation in a Ni-P/Al-Mg composite by forced resonance and acoustic emission},
  journal = {Proc.  2nd Japan-US symp. on advances in NDT},
  year = 1999,
}

@article{CTT100421992,
  author = {S.Maekawa and K.Takashima and M.Shimojo and Y.Higo and S.Sugiura and B.Pfister and M.V.Swain},
  title = {Fatigue tests of Ni-P amorphous alloy micro-cantilever beams},
  journal = {Proc. 1999 Int. Microprocesses and Nanotechnology Conf.},
  year = 1999,
}

@article{CTT100421980,
  author = {K.Takashima and T.Kimura and M.Shimojo and Y.Higo and S.Sugiura and M.V.Swain},
  title = {A new fatigue testing machine for micro-sized specimens},
  journal = {Proc. 7th Int. Fatigue Congr. (Fatigue 99)},
  year = 1999,
}

@article{CTT100421979,
  author = {H.Ogi and G.Shimoike and M.Hirao and K.Takashima and T.Ohtani},
  title = {Electromagnetic acoustic resonance of SiC/Ti composites at elevated temperature},
  journal = {Review of Progress in Quantitative Nondestructive Evaluation},
  year = 1999,
}

@article{CTT100421978,
  author = {安藤新二 and 後藤卓史 and 高島和希 and 頓田英機},
  title = {HCP金属における(c+a)転位芯構造の分子動力学シミュレーション},
  journal = {日本金属学会誌},
  year = 1999,
}

@article{CTT100421977,
  author = {S.Ando and Y.Mine and K.Takashima and S.Itoh and H.Tonda},
  title = {Explosive compaction of Nd-Fe-B powder},
  journal = {J. Mater. Processing Tech.},
  year = 1999,
}

@article{CTT100422003,
  author = {前川智 and 高島和希 and 下条雅幸 and 肥後矢吉 and 杉浦眞佐 and M.V.Swain},
  title = {ミクロンサイズのNi-Pアモルファス合金片持ち梁試験片の疲労特性評価},
  journal = {日本機械学会平成11年度材料力学部門講演会講演論文集},
  year = 1999,
}

@article{CTT100422001,
  author = {高島和希 and 前川智 and 下条雅幸 and 肥後矢吉 and 杉浦眞佐 and M.V.Swain},
  title = {マイクロマシンを構成する超微小部品の力学的特性評価装置},
  journal = {日本機械学会平成11年度材料力学部門講演会講演論文集},
  year = 1999,
}

@article{CTT100430222,
  author = {S. Maekawa and K. Takashima and M. Shimojo and Y. Higo and S. Sugiura and B. Pfister and M. V. Swain},
  title = {Fatigue Tests of Ni-P Amorphous Alloy Microcantilever Beams},
  journal = {Jpn. J. Appy. Phys.},
  year = 1999,
}

@article{CTT100422430,
  author = {小倉暁生 and 垂水竜一 and 高島和希 and 肥後矢吉},
  title = {Ni-P系アモルファス合金の変形に伴う微細構造変化},
  journal = {日本金属学会講演概要　第125回},
  year = 1999,
}

@article{CTT100422429,
  author = {垂水竜一 and 小倉暁生 and 下条雅幸 and 高島和希 and 肥後矢吉},
  title = {アモルファス金属の繰り返し荷重負荷に伴う微細構造変化の分子動力学計算},
  journal = {日本金属学会講演概要　第125回},
  year = 1999,
}

@article{CTT100422428,
  author = {稲邑朋也 and 下条雅幸 and 高島和希 and 肥後矢吉},
  title = {オーステナイトステンレス鋼におけるナノサイズα'マルテンサイトによる疲労強化},
  journal = {日本金属学会講演概要　第125回},
  year = 1999,
}

@article{CTT100422427,
  author = {高島和希 and 前川智 and 下条雅幸 and 肥後矢吉 and 杉浦眞佐 and M.V.Swain},
  title = {ミクロンサイズのアモルファス合金微小試験片の破壊と疲労特性},
  journal = {日本金属学会講演概要　第125回},
  year = 1999,
}

@article{CTT100422336,
  author = {高島和希},
  title = {AE法による高分子材料の変形と破壊機構の解明},
  journal = {第12回アコーステイック・エミッション総合コンファレンス},
  year = 1999,
}

@article{CTT100422325,
  author = {高島和希},
  title = {AE測定によるNi-P/Al-Mg積層材の損傷過程解析},
  journal = {第12回アコーステイック・エミッション総合コンファレンス},
  year = 1999,
}

@article{CTT100422324,
  author = {高島和希},
  title = {AEによるナノサイズマルテンサイト変態開始温度の決定},
  journal = {第12回アコーステイック・エミッション総合コンファレンス},
  year = 1999,
}

@article{CTT100422059,
  author = {H. Ogi and K. Takashima and H. Ledbetter and M. L. Dunn and G. Shioike and M. Hirao and P. Bowen},
  title = {Elastic Constants and Internal Friction of an SiC-Fiber-Reinforced Ti-Alloy-Matrix Crossply Composite: Measurement and Theory},
  journal = {Acta Mater.},
  year = 1999,
}

@article{CTT100421998,
  author = {K.Takashima and C.Ishiyama and J.Hu and Y.Higo},
  title = {Micromechanisms of deformation and fracture in crystalline polymers},
  journal = {Proc. 2nd ESIS TC4 Conf. Polymers and Composites},
  year = 1999,
}

@article{CTT100421996,
  author = {高島和希 and 前川智 and 下条雅幸 and 肥後矢吉 and 杉浦眞佐 and M.V.Swain},
  title = {ミクロンサイズのアモルファス合金微小試験片に対する疲労試験},
  journal = {日本機械学会1999年度年次大会講演論文集},
  year = 1999,
}

@article{CTT100421995,
  author = {高島和希},
  title = {Ni-P系アモルファス合金の繰返し荷重負荷に伴う微細構造変化},
  journal = {日本金属学会講演概要　第124回},
  year = 1999,
}

@article{CTT100421994,
  author = {高島和希 and 木村高行 and 前川智 and 下条雅幸 and 肥後矢吉 and 杉浦眞佐 and M.V.Swain},
  title = {ミクロンサイズ試験片用疲労試験機の開発とアモルファス合金微小試験片の疲労試験},
  journal = {日本金属学会講演概要　第124回},
  year = 1999,
}

@article{CTT100422047,
  author = {古木　慎也 and 後藤　卓史 and 安藤　新二 and 高島　和希 and 頓田　英機},
  title = {チタン単結晶におけるき裂進展過程の分子動力学シミュレーション},
  journal = {日本金属学会講演概要（第123回},
  year = 1998,
}

@article{CTT100421844,
  author = {山田　敏光 and 峯　洋二 and 安藤　新二 and 高島　和希 and 頓田　英機},
  title = {Ti単結晶における疲労き裂伝播挙動とその結晶方位依存性},
  journal = {平成10年度日本金属学会九州支部講演会概要},
  year = 1998,
}

@article{CTT100421843,
  author = {安藤　新二 and 豊増　ゆかり and 高島　和希 and 頓田　英機},
  title = {Ti単結晶の引張変形挙動},
  journal = {平成10年度日本金属学会九州支部講演会概要},
  year = 1998,
}

@article{CTT100421842,
  author = {安藤　新二 and 岩下　和隆 and 高島　和希 and 頓田　英機},
  title = {多体間ポテンシャルによるHCP金属における(c+a)転位芯構造の分子動力学シミュレーション},
  journal = {日本金属学会講演概要（第122回）},
  year = 1998,
}

@article{CTT100421841,
  author = {山田　敏光 and 峯　洋二 and 安藤　新二 and 高島　和希 and 頓田　英機},
  title = {チタン単結晶における疲労き裂伝播とその結晶方位依存性},
  journal = {日本金属学会講演概要（第122回）},
  year = 1998,
}

@article{CTT100421840,
  author = {高島　和希 and 木村　高行 and 下条　雅幸 and 肥後　矢吉 and 杉浦　眞佐 and Michael V. SWAIN},
  title = {マイクロサイズ試験片用超小型疲労試験機の開発},
  journal = {日本金属学会講演概要（第123回）},
  year = 1998,
}

@article{CTT100421839,
  author = {高島　和希 and 木村　高行 and 下条　雅幸 and 肥後　矢吉 and 杉浦　眞佐 and Michael V. SWAIN},
  title = {マイクロサイズ試験片用疲労試験装置の開発},
  journal = {第42回日本学術会議材料連合講演会前刷集},
  year = 1998,
}

@article{CTT100419564,
  author = {峯洋二 and 安藤新二 and 高島和希 and 頓田英機 and 肥後矢吉},
  title = {チタン単結晶における疲労き裂伝播の結晶方位依存性},
  journal = {日本金属学会誌},
  year = 1998,
}

@article{CTT100419561,
  author = {峯洋二 and 守屋太郎 and 安藤新二 and 高島和希 and 頓田英機},
  title = {Effect of Crystallographi Orientation on Fatigue Crack Growth of an Fe-3manss%Si Single Crystal.},
  journal = {J. Soc. Mat. Sci. Jpn.},
  year = 1998,
}

@article{CTT100419560,
  author = {Y. Mine and T. Yamada and S. Ando and K. Takashima and H. Tonda and Y. Higo},
  title = {Fatigue Crack Propagation in Titanium Single Crystals},
  journal = {Key Engineering Materials},
  year = 1998,
}

@article{CTT100422046,
  author = {山田　敏光 and 峯　洋二 and 安藤　新二 and 高島　和希 and 頓田　英機},
  title = {チタン単結晶の疲労き裂伝播に及ぼす結晶方位の影響},
  journal = {日本金属学会講演概要（第123回）},
  year = 1998,
}

@article{CTT100422042,
  author = {高島　和希 and 木村　高行 and 下条　雅幸 and 肥後　矢吉 and 杉浦　眞佐 and Michael V. SWAIN},
  title = {マイクロサイズ試験片用疲労試験装置の開発},
  journal = {第42回日本学術会議材料連合講演会前刷集},
  year = 1998,
}

@article{CTT100422034,
  author = {高島和希},
  title = {アコースティックエミッション法によるエンジニアリング・プラスティックPEEKの変形過程の解析},
  journal = {非破壊検査},
  year = 1998,
}

@article{CTT100421864,
  author = {Sinji ANDO and Hideki TONDA and Shinya FURUKI and Kazuki TAKASHIMA},
  title = {Molecular Dynamics Simulation of Crack Propagation in α-Titanium Single Crystals},
  journal = {Modeling and Simulation Based Engineering},
  year = 1998,
}

@article{CTT100433734,
  author = {峯洋二 and 守屋太郎 and 安藤新二 and 高島和希 and 頓田英機},
  title = {Fe-3%massSi合金単結晶の疲労き裂伝播挙動に及ぼす結晶方位の影響},
  journal = {日本金属学会誌},
  year = 1998,
}

@article{CTT100421852,
  author = {大谷　俊博 and 荻　博次 and 平尾　雅彦 and 高島　和希},
  title = {電磁超音波共鳴法を用いたSiC/Ti合金複合材料の高温超音波特性評価},
  journal = {日本金属学会講演概要（第123回）},
  year = 1998,
}

@article{CTT100419559,
  author = {峯洋二 and 諸藤友輔 and 安藤新二 and 高島和希 and 頓田英機},
  title = {Fatigue Crack Growth Behavior in a TiAl Based Aluminium with Lamellar Microstructure.},
  journal = {J. Soc. Mat. Sci. Jpn.},
  year = 1997,
}

@article{CTT100421863,
  author = {安藤新二 and 豊増ゆかり and 高島和希 and 頓田英機},
  title = {チタン単結晶における活動すべり系},
  journal = {日本金属学会講演概要（第121回）},
  year = 1997,
}

@article{CTT100421862,
  author = {峯洋二 and 山田敏光 and 安藤新二 and 高島和希 and 頓田英機},
  title = {純チタン単結晶の疲労き裂伝播挙動に及ぼす結晶方位の影響},
  journal = {日本金属学会講演概要（第121回）},
  year = 1997,
}

@article{CTT100421861,
  author = {諸藤友輔 and 峯洋二 and 安藤新二 and 高島和希 and 頓田英機},
  title = {TiAl基合金の疲労き裂伝播抵抗に及ぼす組織因子の影響},
  journal = {日本金属学会講演概要（第121回)},
  year = 1997,
}

@article{CTT100421860,
  author = {吉田勝起 and 安藤新二 and 高島和希 and 頓田英機},
  title = {SiC繊維強化Ti合金の疲労き裂伝播挙動},
  journal = {日本金属学会九州支部講演会概要（第93回）},
  year = 1997,
}

@article{CTT100421859,
  author = {諸藤友輔 and 峯洋二 and 安藤新二 and 高島和希 and 頓田英機},
  title = {TiAl基合金の疲労き裂伝播抵抗に及ぼすラメラー組織の影響},
  journal = {日本金属学会九州支部講演会概要（第93回）},
  year = 1997,
}

@article{CTT100421858,
  author = {守屋太郎 and 峯洋二 and 安藤新二 and 高島和希 and 頓田英機},
  title = {Fe-3%Si合金単結晶の疲労き裂伝播挙動},
  journal = {日本金属学会九州支部講演会概要（第93回）},
  year = 1997,
}

@article{CTT100421857,
  author = {峯洋二 and 福井紀江 and 安藤新二 and 高島和希 and 頓田英機},
  title = {チタン単結晶における疲労き裂伝播挙動解析},
  journal = {日本金属学会九州支部講演会概要（第93回）},
  year = 1997,
}

@article{CTT100421856,
  author = {伴信一郎 and 安藤新二 and 高島和希 and 頓田英機},
  title = {Cd単結晶における２次錘面すべりのせん断方位依存性},
  journal = {日本金属学会九州支部講演会概要（第93回）},
  year = 1997,
}

@article{CTT100421855,
  author = {豊増ゆかり and 安藤新二 and 高島和希 and 頓田英機},
  title = {チタン単結晶の引張変形挙動},
  journal = {日本金属学会九州支部講演会概要（第93回},
  year = 1997,
}

@article{CTT100421854,
  author = {峯洋二 and 安藤新二 and 高島和希 and 頓田英機},
  title = {チタン単結晶における疲労き裂伝播挙動の結晶方位依存性},
  journal = {日本金属学会講演概要（第120回)},
  year = 1997,
}

@article{CTT100421853,
  author = {安藤　新二 and 岩下　和隆 and 高島　和希 and 頓田　英機},
  title = {多体間ポテンシャルを用いたHCP金属の(c+a)転位芯構造の分子動力学シミュレーション},
  journal = {日本金属学会講演概要（第120回),},
  year = 1997,
}

@article{CTT100419558,
  author = {H. Ohtsuka and K.Takashima and G.B.Olson},
  title = {Nonthermoelastic and Thermoelastic Martensitic Transformation Behavior characterized by Acoustic Emission in an Fe-Pt Alloy.},
  journal = {MRS Symp. Proc.},
  year = 1997,
}

@article{CTT100419556,
  author = {峯洋二 and 安藤新二 and 高島和希 and 頓田英機 and 肥後矢吉},
  title = {α-チタン単結晶における疲労き裂伝播挙動},
  journal = {日本金属学会誌},
  year = 1997,
}

@article{CTT100419555,
  author = {K. Takashima and K. M. Fox and C. Barney and J. G. Pursell and P. Bowen},
  title = {Characterisation of Acoustic Emission Signals During Fracture and Fatigue of SiC Fibre Reinforced Ti Alloy Composites.},
  journal = {Materials Science and Technology},
  year = 1996,
}

@article{CTT100419551,
  author = {K. Takashima and S. Ando and H. Tonda and P. Bowen},
  title = {Damage Evolution and Dynamic Mechanical Properties on a SiC Fibre Reinforced Ti Alloy Composite},
  journal = {Materials Transactions, JIM},
  year = 1996,
}

@article{CTT100419550,
  author = {S. Ando and K. Takashima and H. Tonda},
  title = {Molecular Dynamics Simulation of(c+a)Edge Dislocation Core Structure in HCP Crystals},
  journal = {Materials Transactions, JIM},
  year = 1996,
}

@article{CTT100419548,
  author = {K. Takashima and M. Nishida},
  title = {Acoustic Emssion During R-Phase and Martensitic Transformations in a Ti┣D250.2┫D2Ni┣D248.3┫D2Fe┣D21.5┫D2 Alloy.},
  journal = {Journal de Physique IV, Colloque C8, suppl(]J1117[)ment au Journal de Physique III},
  year = 1995,
}

@article{CTT100419547,
  author = {K. Takashima and M. Nishida},
  title = {Characterization of Acoustic Emission Signals During Phase Transformations in a TiNiFe Shape Memory Alloy.},
  journal = {J. Acoustic Emission},
  year = 1995,
}

@article{CTT100419543,
  author = {H. Tonda and S. Ando and K. Takashima and T. Vreeland. Jr.},
  title = {Secondary Pyramidal Slip in Cadmium Crystals-II. Mechanisms.},
  journal = {Acta Metallurgica et Materialia},
  year = 1994,
}

@article{CTT100419542,
  author = {H. Tonda and S. Ando and K. Takashima and T. Vreeland and Jr.},
  title = {Secondary Pyramidal Slip in Cadmium Crystals-I. Experiments.},
  journal = {Acta Metallurgica et Materialia},
  year = 1994,
}

@article{CTT100419541,
  author = {Y. Fukui and K. Takashima and C. B. Ponton},
  title = {Measurement of Young's Modulus and Internal Friction of an In-Situ Al/Al┣D23┫D2Ni Functionally Gradient Materials.},
  journal = {J. Materials Sci.},
  year = 1994,
}

@article{CTT100419537,
  author = {安藤新二 and 高島和希 and 頓田英機},
  title = {マグネシウム単結晶の{1122}<1123>すべり},
  journal = {軽金属},
  year = 1992,
}

@article{CTT100419536,
  author = {佐久間克彦 and 水田博志 and 高木克公 and 高島和希},
  title = {Effects of Enfoced Exercise on Biomechanical Properties of the Anterior Cruciate Ligament of Bipedal Rats.},
  journal = {J. Jpn. Orthopaedic Association},
  year = 1992,
}

@article{CTT100419535,
  author = {M. Nishida and K. Kaneko and K. Takashima and K. Yamauchi and T. Inaba},
  title = {Practical Application of Static Rock Breaker Using TiNi Shape Memory Alloy.},
  journal = {MRS Proc.},
  year = 1992,
}

@article{CTT100419534,
  author = {K. Takashima and H. Tonda and M. Nishida and M. Suzuki and T. Takeshita},
  title = {Effects of Shock Compaction on Microstructures and Superconducting Properties of Oxide Superconductors.},
  journal = {Shock Waves},
  year = 1992,
}

@article{CTT100419532,
  author = {佐久間克彦 and 水田博志 and 甲斐功一 and 高木克公 and 宇宿源太郎 and 大淵慶史 and 高島和希},
  title = {The Effect of Enforced Exercise on the Biomechanical and Histological Properties of the Anterior Cruciate Ligament of Bipedal Rats.},
  journal = {Orthopedic Biomechanics},
  year = 1991,
}

@article{CTT100419528,
  author = {高島和希 and 頓田英機 and 清水勲 and 友納憲昭 and 宮本美智雄},
  title = {Explosive Compaction of Pure Iron Powder},
  journal = {J. Jpn. Inst. Metals},
  year = 1990,
}

@article{CTT100419527,
  author = {安藤新二 and 高島和希 and 頓田英機},
  title = { Secondary Pyramidal Slip in Cadmium Single Crystals},
  journal = {J. Jpn. Inst. Metals},
  year = 1990,
}

@article{CTT100419526,
  author = {安藤新二 and 高島和希 and 頓田英機},
  title = {Deformation Behavior by Non-Basal Slip in Cadmium Single Crystals},
  journal = {J. Jpn. Inst. Metals},
  year = 1989,
}

@article{CTT100419523,
  author = {高島和希 and 頓田英機 and 上野　學 and 虎石龍雄},
  title = {Fe-25Cr-5A1耐熱合金粉の爆発圧縮成形},
  journal = {鉄と鋼},
  year = 1987,
}

@article{CTT100419522,
  author = {落合鍾一 and 上野　學 and 小島　陽 and 高島和希 and 金刺久義},
  title = {ガスバブリング噴霧法による微細アルミニウム粉末の作製},
  journal = {軽金属},
  year = 1987,
}

@article{CTT100419521,
  author = {上野　學 and 高島和希 and 高村久雄 and 福本博光},
  title = {雪氷に対する屋根鋼板の特性評価},
  journal = {日本雪氷学会誌},
  year = 1987,
}

@article{CTT100419520,
  author = {高島和希 and 上野　學},
  title = {高温・高速回転荷重下における軸受鋼のころがり疲れ挙動},
  journal = {鉄と鋼},
  year = 1986,
}

@article{CTT100419519,
  author = {高島和希 and 肥後矢吉 and 布村成具},
  title = {Determination of Crack Initiation Point in J┣D2IC┫D2 Testing Using Acoustic Emission Frequency Analysis},
  journal = {J. Soc. Mat. Sci. Jpn.},
  year = 1984,
}

@article{CTT100419518,
  author = {K. Takashima and Y. Higo and S. Nunomura},
  title = {The Propagation Velocity of the Martensitic Transformation in 304 Stainless Steel.},
  journal = {Philosophical Magazine},
  year = 1984,
}

@article{CTT100419517,
  author = {K. Takashima and Y. Higo and S. Nunomura},
  title = {Determination of the Duration of Transient Phenomena by Frequency-Domain Analysis of Acoustic Emission.},
  journal = {Philosophical Magazine},
  year = 1984,
}

@article{CTT100419510,
  author = {K. Takashima and Y. Higo and S. Nunomura},
  title = {Identification of Acoustic Emission During the Martensite Transformation of 304 Stainless Steel.},
  journal = {Scripta Met.},
  year = 1980,
}

@inproceedings{CTT100635872,
  author = {藤崎 秀俊 and 松田 光弘 and 高島 和希 and 峯 洋二 and 竹山 雅夫},
  title = {TiAl 基合金の引張挙動のその場観察},
  booktitle = {日本金属学会講演概要2012年春期講演 (第150回) 大会(DVD)},
  year = 2012,
}

@inproceedings{CTT100592520,
  author = {Daisuke Miyaguchi and Masaaki Otsu and Kazuki Takashima and Masao Takeyama},
  title = {Microscale Fracture Toughness Testing of TiAl PST Crystals},
  booktitle = {Mater. Res. Soc. Proc.},
  year = 2009,
}

@inproceedings{CTT100608130,
  author = {Yuki Ide and Masaaki Otstu and Junpei Sakurai and Seiichi Hata and Kazuki Takashima},
  title = {Bending of Pd-based thin film metallic glasses by laser forming process},
  booktitle = {MRS Proceeding},
  year = 2009,
}

@inproceedings{CTT100587026,
  author = {Daisuke Miyaguchi and Masaaki Otsu and Kazuki Takashima and Masao Takeyama},
  title = {Microscale Fracture Toughness Testing of TiAl PST Crystals},
  booktitle = {MRS Fall Meeting Abstact Book},
  year = 2008,
}

@inproceedings{CTT100565997,
  author = {井手雄紀 and 大津雅亮 and 櫻井淳平 and 秦誠一 and 高島和希},
  title = {Pd基金属ガラス箔のレーザフォーミング},
  booktitle = {日本金属学会九州支部日本鉄鋼協会九州支部共催平成20年度合同学術講演大会講演概要集},
  year = 2008,
}

@inproceedings{CTT100566003,
  author = {Masaaki Otsu and Yuki IDE and Junpei Sakurai and Seiichi Hata and Kazuki Takashima},
  title = {Laser Forming of Pd-Based Thin Film Metallic Glass},
  booktitle = {Proc. 4th KU-KITECH Symposium on Bulk Metallic Glasses and Advanced Materials},
  year = 2008,
}

@inproceedings{CTT100566000,
  author = {大津雅亮 and 井手雄紀 and 櫻井淳平 and 秦誠一 and 高島和希},
  title = {金属ガラス箔のレーザフォーミング},
  booktitle = {平成20年度塑性加工春季講演会講演論文集,},
  year = 2008,
}

@inproceedings{CTT100507770,
  author = {T.Kamikawa and R.Tarumi and KAZUKI TAKASHIMA and YAKICHI HIGO},
  title = {Formation of self-orientated nanocrystals in an amorphous alloy under focused-ion-beam irradiation},
  booktitle = {Transactions of the Materials Research Society of Japan},
  year = 2004,
}

@inproceedings{CTT100492832,
  author = {小山聡 and K. Nakai and KAZUKI TAKASHIMA and Y. Higo},
  title = {Fracture Toughness Tests of Thin Films for MEMS Applications},
  booktitle = {Trans. Mat. Res. Soc. Japan},
  year = 2003,
}

@inproceedings{CTT100507816,
  author = {T.Inamura and K.Takashima and Y.Higo},
  title = {Formation of a Pitsch-related bcc. crystal at an intersection of <112>{111} shears in a fcc. crystal},
  booktitle = {Transactions of the Materials Research Society of Japan},
  year = 2003,
}

@inproceedings{CTT100507778,
  author = {R.Tarumi and T.Kamikawa and KAZUKI TAKASHIMA and YAKICHI HIGO},
  title = {Formation of orientated nano-sized crystals in an amorphous alloy under focused ion beam irradiation},
  booktitle = {Transactions of the Materials Research Society of Japan},
  year = 2003,
}

@inproceedings{CTT100507779,
  author = {T.Kamikawa and R.Tarumi and KAZUKI TAKASHIMA and YAKICHI HIGO},
  title = {Orientation control of nanocrystals in anamorphous alloy by ion beam irradiation},
  booktitle = {Transactions of the Materials Research Society of Japan},
  year = 2003,
}

@inproceedings{CTT100492851,
  author = {K. Yamada and S. Watanabe and KAZUKI TAKASHIMA and Y. Higo},
  title = {Nanocrystallization of Surface Layer in a 316 Austenitic Stainless Steel by Ultrasonic Shot Peening},
  booktitle = {Trans. Mat. Res. Soc. Japan},
  year = 2003,
}

@inproceedings{CTT100471331,
  author = {Ryuichi Tarumi and T. Kamikawa and KAZUKI TAKASHIMA and Y. Higo},
  title = {Formation of 3-Dimensionally Oriented Nano-Sized Crystals in an Amorphous Alloy Under Ion Beam Irradiation,},
  booktitle = {2002 MRS Fall Meeting},
  year = 2002,
}

@inproceedings{CTT100437729,
  author = {Ryuichi Tarumi and A.Ogura and Masayuki SHIMOJO and KAZUKI TAKASHIMA and Y.Higo},
  title = {Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation},
  booktitle = {Jpn. J. Appl. Phys.},
  year = 2000,
}

@inproceedings{CTT100437757,
  author = {Ryuichi Tarumi and A.Ogura and Masayuki SHIMOJO and KAZUKI TAKASHIMA and Y.Higo},
  title = {Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--},
  booktitle = {Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000)},
  year = 2000,
}

@inproceedings{CTT100437788,
  author = {Ryuichi Tarumi and A.Ogura and Masayuki SHIMOJO and KAZUKI TAKASHIMA and Y.Higo},
  title = {Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal},
  booktitle = {MRS 2000 fall meeting Abst.},
  year = 2000,
}

@misc{CTT100596277,
  author = {KAZUKI TAKASHIMA},
  title = {アコースティックエミッション法による金属材料の変態および破壊過程の解析},
  year = 1984,
}



@phdthesis{CTT100596277,
  author = {KAZUKI TAKASHIMA},
  title = {アコースティックエミッション法による金属材料の変態および破壊過程の解析},
  school = {東京工業大学},
  year = 1984,
}