論文

• Zichen Yang, Wataru Takarada, Hidetoshi Matsumoto. Effect of the fiber diameter of polyamide 11 nanofibers on their internal molecular orientation and properties, Macromol. Rapid Commun., Wiley-VCH, Vol. 44, No. 18, 2300212, Sept. 2023.  公式リンク  
  
• Wataru Takarada, Mohammad A. Barique, Tatsuma Kunimitsu, Takao Kameda, TAKESHI KIKUTANI. Verification of the Influence of Processing History through Comparing High-Speed Melt Spinning Behavior of Virgin and Recycled Polypropylene, Polymers, Aug. 2022.  公式リンク  
  
• Ladan Eskandarian, Amirali Toossi, Farah Nassif, Sahar Golmohammadi Rostami, Siting Ni, Amin Mahnam, Milad Alizadeh Meghrazi, Wataru Takarada, TAKESHI KIKUTANI, Hani E. Naguib. 3D‐Knit Dry Electrodes using Conductive Elastomeric Fibers for Long‐Term Continuous Electrophysiological Monitoring, Advanced Materials Technologies, July 2022.  公式リンク  
  
• Zongzi Hou, Nahoko Itagaki, Haruki Kobayashi, Katsufumi Tanaka, Wataru Takarada, Takeshi Kikutani, Midori Takasaki. Bamboo Charcoal/Poly(L-lactide) Fiber Webs Prepared Using Laser-Heated Melt Electrospinning, Polymers, Vol. 13, No. 16, p. 2776, Aug. 2021.
• Dongyang Li, Wataru Takarada, Minoru Ashizawa, Takuya Yamamoto, Hidetoshi Matsumoto. Effect of hydrogen-deuterium exchange of amide linkages on properties of electrospun polyamide nanofibers, Polymer, Elsevier, Vol. 229, 123994, Aug. 2021.  公式リンク  
  
• Kimura Daisuke, Irisawa Toshihira, Takagi Kentaro, Tahara Kenji, Sakurai Daichi, Watanabe Haruhiko, Takarada Wataru, Shioya Masatoshi. Mechanism for anisotropic thermal expansion of polyamide fibers, Sensors and Actuators B: Chemical, ELSEVIER, Vol. 344, p. 1, July 2021.
• Wataru Takarada, Kenichi Sugimoto, Hajime Nakajima, Hendrikus A. Visser, Gert-Jan M. Gruter, Takeshi Kikutani. Melt-Spun Fibers from Bio-Based Polyester–Fiber Structure Development in High-Speed Melt Spinning of Poly(ethylene 2,5-furandicarboxylate) (PEF), Materials, Vol. 14, No. 5, p. 1172, May 2021.
• Masahiro Shinkawa, Kazunori Motai, Keita Eguchi, Wataru Takarada, Minoru Ashizawa, Hiroyasu Masunaga, Noboru Ohta, Yuhei Hayamizu, Hidetoshi Matsumoto. Preparation of perfluorosulfonated ionomer nanofibers by solution blow spinning, Membranes, Multidisciplinary Digital Publishing Institute, Vol. 11, No. 6, pp. 389, May 2021.  公式リンク  
  
• Kozo Iiba, Takarada, W., Kikutani, T.. Effect of Introducing Long Chain Branching on Fiber Diameter and Fiber Diameter Distribution in Melt Blowing Process of Polypropylene, International Polymer Processing, 2021.  公式リンク  
  
• Kawahara, Yutaka, wataru takarada, Takeda, Koji, Ikeda, Yoshimitsu, Onda, Kouki, Kikutani, Takeshi. Dyeing Behavior and Multi-Functionalities of Polylactide/Poly (Ethylene Terephthalate) Conjugate Fibers Produced by High-Speed Melt-Spinning, Journal of Macromolecular Science - Physics, Vol. 60, No. 1, pp. 63-75, Dec. 2020.  公式リンク  
  
• Kawahara, Yutaka, Yoshida, Kazuhiro, Okamura, Shouhei, wataru takarada, Yoshioka, Taiyo, Minami, Hideaki, Kamei, Kaeko, Kikutani, Takeshi. Crystallization Behavior of Bombyx mori Silkworm Fibroin in Liquid Silk in Static and Flow States: Influence of the Interactions of the Sericin Fractions with the Fibroin, Journal of Macromolecular Science - Physics, Vol. 60, No. 3, pp. 153-174, Nov. 2020.  公式リンク  
  
• Kawahara, Yutaka, wataru takarada, Yamamoto, Masaki, Kondo, Yasuhito, Tashiro, Kohji, Kikutani, Takeshi. Fiber Structure, Tensile Behavior and Antibacterial Activity of Polylactide/Poly(butylene terephthalate) Bicomponent Fibers Produced by High-Speed Melt-Spinning, Journal of Macromolecular Science - Physics, Vol. 59, No. 7, pp. 400-456, July 2020.  公式リンク  
  
• Wataru Takarada, Sho Hatano, Takeshi Kikutani. Experimental and Numerical Analysis of Unstable Behavior of Melt Blowing Process, Journal of Fiber Science and Technology, 繊維学会, Vol. 76, No. 7, p. 208-216, July 2020.
• Saigusa, K., Takarada, W., Kikutani, T.. Improvement of the Mechanical Properties of Poly(Glycolic Acid) Fibers Through Control of Molecular Entanglements in the Melt Spinning Process, Journal of Macromolecular Science - Physics, 59, 6, 399-414, Mar. 2020.  公式リンク  
  
• Dong-Woo Go, Takarada Wataru, Aneja Arun, Kikutani Takeshi. Analysis of Fiber Structure and Properties of Drawn Fibers prepared by Cold Drawing in Ethanol and subsequent Hot Drawing, PPS-35, AIP Conference Proceedings, AIP Publishing, 2205, 020009, Jan. 2020.
• Tokuda, Tomoki, Tsuruda, Ryo, Hara, Takuya, Kobayashi, Haruki, Tanaka, Katsufumi, wataru takarada, TAKESHI KIKUTANI, Hinestroza, Juan P., Razal, Joselito M., Takasaki, Midori. Structure and Properties of Poly(ethylene terephthalate) Fiber Webs Prepared via Laser-Electrospinning and Subsequent Annealing Processes, Materials, 2020.  公式リンク  
  
• K. Saigusa, H. Saijo, M. Yamazaki, W. Takarada, T. Kikutani. Influence of carboxylic acid content and polymerization catalyst on hydrolytic degradation behavior of poly(glycolic acid) fibers, Polymer Degradation and stability, Dec. 2019.
• Nanjaporn Roungpaisan, Wataru Takarada, Takeshi Kikutani. Development of Polylactide Fibers Consisting of Highly Oriented stereocomplex Crystals Utilizing High-Speed Bicomponent Melt Spinning Process, Journal of Fiber Science and Technology, Vol. 75, No. 9, pp. 119-131, Sept. 2019.
• Yutaka Kawahara, Motohiro Hanada, Shota Onosato, Wataru Takarada, Midori Takasaki, Koji Takeda, Yoshimitsu Ikeda, Takeshi Kikutani. High-Speed Melt Spinnint of Polylactide/Poly(Butyleneterephthalate) Bicomponent Fibers: Mechanism of Fiber Structure Development and Dyeing Behavior, Journal of Macromolecular Science Part B Physics, Aug. 2019.
• Dongwoo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Continuous Drawing of Poly(ethylene terephthalate) in Ethanol and Agile Functionalization through Infusion, Materials Today Communications, Vol. 19, pp. 98-105, 2019.
• Hirotaka Inoue, Takayuki Yoshiyama, Masaki Hada, Daiki Chujo, Yoshitaka Saito, Takeshi Nishikawa, Yoshifumi Yamashita, Wataru Takarada, Hidetoshi Matsumoto, Yasuhiko Hayashi. High-performance structure of a coil-shaped soft-actuator consisting of polymer threads and carbon nanotube yarns, AIP Adv., AIP Publishing, Vol. 8, No. 7, pp. 075316/1-7, July 2018.  公式リンク  
  
• K. Kawai, W. Takarada, T. Kikutani. Effect of Mutual Interaction between High and Low stereo-Regularity Components on Structure Formation in Melt Spinning Process of Isotactic Polypropylene Blend Fibers, International Polymer Processing, Vol. 23, No. 3, pp. 387-396, June 2018.
• Natsumi Fukushi, Miku Yoshizawa, Shota Onosato, Motohiro Hanada, Midori Takasaki, Wataru Takarada, Yutaka Kawahara, Takeshi Kikutani, Haruki Kobayashi, Katsufumi Tanaka. Analysis of Multiple Melting of High-Speed Melt Spun Polylactide Fibers Based on Kinetic Modeling, Journal of Macromolecular Science Part B Physics, Feb. 2018.
• Charinee Winotapun, Noppadon Kerddonfag, Witchuda Daud, Wannee Chinsirikul, Wataru Takarada, Takeshi Kikutani. Effect of biaxial-simultaneous stretching conditions on OTR and CO2 permeation of CO2 laser peerforated poly(lactic acid) film, Packaging Technology and Science, Vol. 31, pp. 545-556, 2018.
• Charinee Winotapun, Utaiwan Watcharosin, Noppadon Kerddonfag, Wannee Chinsirikul, Wataru Takarada, Takeshi Kikutani. Microhole Formation Behavior of Polypropylene Film Using CO2 Laser Irradiation, Journal of Fiber Science and Technology, Vol. 73, No. 10, pp. 240-250, Oct. 2017.
• Toshiharu Iwasaki, Wataru Takarada, Takeshi Kikutani. Effect of Processing Conditions on Heat Seal Strength for Peelable Heat Sealing of Multilayered Polyethylene Films with Different Sealant Layers, Journal of Macromolecular Science Part B Physics, Vol. 56, No. 9, pp. 709-723, Sept. 2017.
• Midori Takasaki, Natsumi Fukushi, Miku Yoshizawa, Shota Onosato, Motohiro Hanada, Wataru Takarada, Yutaka Kawahara, Takeshi Kikutani, Haruki Kobayashi, Katsufumi Tanaka. Multiple Melting Behavior of High-Speed Melt Spun Polylactide Fibers, Journal of Macromolecular Science Part B Physics, Vol. 56, No. 3, pp. 143-160, Mar. 2017.
• Qing Qin, Wataru Takarada, Takeshi Kikutani. Fiber Structure Development of PHBH through Stress-Induced Crystallization in High-speed Melt Spinning Process, Journal of Fiber Science and Technology, Vol. 73, No. 2, pp. 49-60, Feb. 2017.
• wataru takarada, Hatano, S., Kikutnai, T.. Numerical analysis of non-steady state melt-blowing process based on a particle method, Fiber Society 2017 Spring Conference: Next Generation Fibers for Smart Products, pp. 119, 2017.
• Choi, Y.C., Nam, I.-W., Kim, D.-G., Jong, I., wataru takarada, Kikutani, T., Hahm, W.-G.. Analysis of PET fiber deformation in high-speed melt spinning by using 2-way on-line diameter measurements, Fiber Society 2017 Spring Conference: Next Generation Fibers for Smart Products, pp. 166, 2017.
• Toshiharu Iwasaki, Wataru Takarada, Takeshi Kikutani. Influence of processing conditions on heat sealing behavior and resultant heat seal strength for peelable heat sealing of multilayered polyethylene films, Journal of Polymer Engineering, Vol. 36, No. 9, pp. 909-916, Sept. 2016.
• Chen Yiwen, Takarada Wataru, Takeshi Kikutani. Effect of Corss-sectional Configuration on Fiber Formation Behavior in the Vicinity of Spinning Nozzle in Bicomponent Melt spinning Process, Journal of Fiber Science and Technology, Vol. 72, No. 7, pp. 154-159, July 2016.
• R. Ruamsuk, W.Takarada, T. Kikutani. Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process, International Polymer Processing, Vol. 31, No. 2, pp. 217-223, Apr. 2016.
• 岩崎年晴, 宝田亘, 鞠谷雄士. 多層ポリエチレンフィルムのピーラブルシールにおけるシール後の冷却条件と滅菌処理前後のシール強度変化の関係, 成形加工, Vol. 28, No. 1, pp. 34-40, Jan. 2016.
• Yutaka Kawahara, Taiyo Yoshioka, Wataru Takarada, takeshi Kikutani, Masaki Tsuji. Alkaline Hydrolysis Kinetics of Poly(ethylene terephthalate) Fibers, Journal of Fiber Science and Technology, Vol. 72, No. 1, pp. 9-16, Jan. 2016.
• 河原 豊, 藤井 秀彰, 宝田亘, 鞠谷雄士, 桑原 伸夫. 樹状構造を発現した液状絹エアロゲルの構造, 日本シルク学会誌, 日本シルク学会, Vol. 24, pp. 5-10, 2016.
• Khanum, R., wataru takarada, Aneja, A., Kikutani, T.. Structure development of poly(ethylene terephthalate) undrawn filament upon cold drawing assisted with infusion of ethanol, Fiber Society 2016 Spring Conference: Textile Innovations - Opportunities and Challenges, 2016.
• R. Khanum, D. W. Go, W. Takarada, A. Aneja, T. Kikutani. Effect of Drawing Speed on Infusion and Drawing Behavior of Poly(ethylene terephthalate) Filaments upon Cold Drawing, Sen'i Gakkaishi, Vol. 71, No. 9, pp. 273-283, Sept. 2015.
• Rina Khanum, Dong Woo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Role of ethanol concentration on drawing and infusion behavior of poly(ethylene terephthalate) filaments upon cold drawing, Polymer, 70, 19-29, June 2015.
• Yuan Jing Zhang, Wataru Takarada, Takeshi Kikutani. Fabrication of Fiber-Reinforced Single-Polymer Composites through Compression Molding of Bicomponent Fibers Prepared by High-Speed Melt Spinning Process, Sen'i gakkaishi, The Society of Fiber Science and Technology, Japan, Vol. 71, No. 5, pp. 172-179, May 2015.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Structure and properties of low-isotacticity polypropylene elastomeric fibers prepared by sheath-core bicomponent spinning: effect of localization of high-isotacticity component near the fiber surface, Journal of Polymer Engineering, volume 35, 3, pp. 277- 285, Mar. 2015.
• Rina Khanum, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Crystallization of poly(ethylene terephthalate) filaments by infusion of ethanol upon cold drawing, Polymer, Elsevier, 59, 26-34, Jan. 2015.
• T.Abe, W. Takarada, T. Kikutani. Effects of pre-annealing on the uni- and bi-axial stretching behavior of poly(ethylene naphthalate) films, AIP Conference Proceedings, AIP Publishing, 1593, pp. 68-71, Oct. 2014.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Structure and Properties of Low-Isotacticity Polypropylene Elastomeric Fibers Prepared by Sheath-Core Bicomponent Spinning - Effect of the Composition of Sheath Layer with Constant High-Isotacticity Polypropylene Content -, Sen'i Gakkaishi, Vol. 70, No. 9, pp. 203-212, Sept. 2014.
• Shahin Kazemi, Mohammad Reza Mohaddes Mojtahedi, Wataru Takarada, Takeshi Kikutani. Morphology and Crystallization Behavior of Nylon 6-Clay/Neat Nylon 6 Bicomponent Nanocomposite Fibers, Journal of Applied Polymer Science, John Wiley & Sons, vol. 131, no. 6, p. 39996, 2014.
• Radon Dhelika, Kenji Sawai, Kunio Takahashi, Wataru Takarada, Takeshi Kikutani, Shigeki Saito. Electrostatic chuck consisting of polymeric electrostatic inductive fibersfor handling of objects with rough surfaces, Smart Materials and Structures, No. 22, pp. 9, Aug. 2013.  公式リンク  
  
• Xiaoshi Xu, Yutaka Shirakashi, Junya Ishibashi, Wataru Takarada, Takeshi Kikutani. Evaluation of surface roughness development of polyamide 6/poly(ethylene terephthalate) blend fibers through fiber diameter measurement using three types of optical equipment, Textile Research Journal, vol. 83, no. 19, pp. 2042-2050, May 2013.
• Shigeki SAITO, Fumiaki Soda, Radon Dhelika, KUNIO TAKAHASHI, wataru takarada, TAKESHI KIKUTANI. Compliant electrostatic chuck based on hairy microstructure, Smart Materials and Structures, IOP Publiching, Vol. 22, pp. 015019(1-6), Dec. 2012.
• X.Xu, Y.Shirakashi, J.Ishibashi, W. Takarada, T. Kikutani. Mechanism of Surface Roughness Development in Melt Spinning of Blend Fibers for Artificial Hair, Textile Research Journal, Vol. 82, No. 13, pp. 1382-1389, June 2012.
• 白樫豊, 朝倉修, 伊藤伸司, 石橋準也, 徐暁師, 宝田亘, 鞠谷雄士. ポリアミド６を主成分とする人工毛髪用表面粗面化ブレンド繊維の開発, 成形加工, Vol. 23, No. 6, pp. 358-364, May 2011.
• M. Masuda, W. Takarada, T. Kikutani. Effect of Control of Polymer Flow in the Vicinity of Spinning Nozzle on Mechanical Properties of Poly(ethylene terephthalate) Fibers, International Polymer Processing, Hanser, Vol. 25, No. 2, pp. 159 - 169, Apr. 2010.
• W.-G.Hahm, W. Takarada, H. Ito, T. Kikutani. On-line Measurement Studies on Orientation Development and Characrteristic Short-Period Diameter Fluctuation in High Speed In-line Drawing of Poly(ethylene terephthalate) Fiber, International Polymer Processing, Vol. 24, No. 3, pp. 280-287, July 2009.
• Hideki Hayashi, Masayo Takizawa, Takayuki Arai, Keisuke Ikeda, Wataru Takarada, Takeshi Kikutani, Yasuhito Koyama, Toshikazu Takata. 9,9-Diarylfluorene-Based Poly(alkyl aryl ether)s: Synthesis and Property, Polym. J., Vol. 41, pp. 609-615, June 2009.
• 増田正人, 宝田亘, 鞠谷雄士. 溶融紡糸ポリエチレンテレフタレート繊維の力学特性に対するノズル径の影響, 繊維学会誌, 繊維学会, Vol. 64, No. 4, pp. 118-126, Apr. 2009.
• 郡洋平, 宝田亘, 伊藤浩志, 武部智明, 南裕, 金井俊孝, 鞠谷雄士. ポリプロピレンの高速溶融紡糸における低立体規則性成分ブレンドの効果, 成形加工, プラスチック成型加工学会, Vol. 20, No. 11, pp. 831-839, Nov. 2008.
• Wataru Takarada, Hiroshi Ito, Takeshi Kikutani, Norimasa OKui. Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. I. Structural Analysis of As-Spun Fibers, J. Appl. Polym. Sci., Vol. 80, pp. 1575-1581, 2001.
• Wataru Takarada, Hiroshi Ito, Takeshi Kikutani, Norimasa OKui. Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. III. Modeling of Melt Spinning Process Incorporating Change in Cross-Sectional Shape, J. Appl. Polym. Sci., Vol. 80, pp. 1589-1600, 2001.
• Wataru Takarada, Hiroshi Ito, Takeshi Kikutani, Norimasa OKui. Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. II. On-Line Measurements of the Spin Line, Including Change in Cross-Sectional Shape, J. Appl. Polym. Sci., Vol. 80, pp. 1582-1588, 2001.
• T. Kikutani, K.Nakao, Wataru Takarada, Hiroshi Ito. On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process, Polymer Engineering & Science, Vol. 39, No. 12, pp. 2349-2357, Dec. 1999.
• T. Kikutani, K. Nakao, wataru takarada, Hiroshi Ito. On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process, Polym. Eng. Sci., Vol. 39, No. 12, pp. 2349-2357, 1999.

著書

• 宝田亘. PET,PENフィルムの一軸,二軸延伸過程における分子配向と結晶化挙動, 延伸による高分子の構造と物性制御, S＆T出版, Jan. 2022.
• 宝田亘, 鞠谷雄士. 繊維・フィルム成形過程の“その場”複屈折測定, 繊維学会誌, Vol. 77, No. 1, p. P-32, Jan. 2021.
• 宝田亘. 第3章 第1節 フィルム製膜・延伸の基礎，第2節 フィルム延伸工程における延伸挙動解析, 高分子の延伸による分子配向・結晶化メカニズムと評価方法, R&D支援センター, Nov. 2020.
• 川本正, 赤坂修一, 宝田亘. 材料科学実験(M,P,C), 材料科学実験(M,P,C), pp. P13-P19, May 2016.
• Takeshi Kikutani, Wataru Takarada. Structure Development in Uniaxial and Biaxial Film Stretching, Film Processing Advances (G.A. Campbell, T. Kanai eds.), Hanser, pp. 263-283, June 2014.
• 宝田亘. PETフィルム成形における結晶化挙動, 高分子の結晶化制御 ―研究開発の最前線とその応用―, シーエムシー出版, pp. 220-231, July 2012.

国際会議発表 (査読有り)

• Go Dongwoo, Wataru Takarada, Arun Aneja, Takeshi Kikutani. In-Situ Observation of Multiple-Necking Behavior in Continuous Cold Drawing of PET Filaments in Ethanol, AIP Conference Proceedings, 2055, May 2019.  公式リンク  
  
• Dong Woo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Structure-property relationship for poly(ethylene terephthalate) fibers prepared throughcontinuous drawing in ethanol, PPS-34, AIP conference proceedings, 2065, 020005, pp. 1-4, Feb. 2019.
• N. Roungpaisan, W. Takarada, T. Kikutani. High-speed Melt Spinning of Sheath/Core Bicomponent Fibers of Poly(L-lactide)s with Different Molecular Weight, AIP conference proceedings, 2065, 030030, pp. 1-4, Feb. 2019.
• Hirotaka Inoue, Takayuki Yoshiyama, Masaki Hada, Daiki Chujo, Yoshitaka Saito, Takeshi Nishikawa, Yoshifumi Yamashita, Wataru Takarada, Hidetoshi Matsumoto, Yasuhiko Hayashi. Effects of heat-generation and transport in coil-shaped soft-actuators consisting of polymer threads and carbon nanotube yarns, 19th International Conference on the Science and Application of Nanotubes and Low-dimensional Materials (NT18), NT18 Abstract Book, The Steering Committee of Nanotube Conferences (SCNC), pp. PA0214, July 2018.
• Go, D., wataru takarada, TAKESHI KIKUTANI. Differentiation of molecular chain entanglement structure through laser Raman spectrum measurement of High strength PET fibers under stress, IOP Conference Series: Materials Science and Engineering, Vol. 254, No. 3, 2017.
• Sekiguchi, Y., wataru takarada, TAKESHI KIKUTANI. Structure and properties of melt-spun fibers of polyethylene blended with cellulose fibers, AIP Conference Proceedings, Vol. 1914, 2017.
• Kawai, K., Kohri, Y., wataru takarada, Takebe, T., Kanai, T., TAKESHI KIKUTANI. Mutual interaction between high and low stereo-regularity components for crystallization and melting behaviors of polypropylene blend fibers, AIP Conference Proceedings, Vol. 1713, 2016.
• Renukarn, R., wataru takarada, TAKESHI KIKUTANI. Melt-blowing conditions for preparing webs consisting of fine fibers, AIP Conference Proceedings, Vol. 1779, 2016.
• Kenji SAWAI, wataru takarada, TAKESHI KIKUTANI, KUNIO TAKAHASHI, Shigeki SAITO. Electrostatic Chuck Consisting of Electrostatic Inductive Polymer Fibers for Handling of Curved Surface, MRS 2011 Fall Meeting, Abstracts, V17.41, Nov. 2011.
• T. Sakurai, W.Takarada, Y. Kohri, T. Takebe, Y. Minami, L.Rong, S. Toki, B.S.Hsiao, T. Kanai, T.Kikutani. Preparation of Elastomeric Fibers by Melt Spinning of Polypropylenes of Low Stereo-regularity, 5th Pacific Rim Conference on Rheology (PRCR-5), Proceedings of 5th Pacific Rim Conference on Rheology, CD-ROM, Aug. 2010.
• W. Takarada, T. Kikutani, T. Gries, C. Willner, S. Houis, S. Walter. Fiber Structure Development in Melt Spinning and Subsequent Drawing Process of Poly(vinilidene fluoride)/Polypropylene Bicomponent Fibers, Japanese-Sino Fiber Symposium 2009, Proceedings of Japanese-Sino Fiber Symposium 2009, Sept. 2009.
• wataru takarada, kunihiko kazama, Hiroshi Ito, T.Kikutani. High-speed Melt Spinning with Periodic Oscillation of Take-up Velocity, Proceedings of Polymer Processing Society 17th annualmeeting, pp. (CD-ROM : 339), 2001.
• wataru takarada, kunihiko kazama, Hiroshi Ito, T.Kikutani. High Speed Melt Spinning with Periodic Oscillation of Take-up Velocity, CAE in Polymer Processing, Gordon Conference, Ventula, USA, Vol. March, 2001.
• T.Kikutani, H.Urabe, wataru takarada, Hiroshi Ito. On-line measurement of orientation development in high-speed melt spinning of polypropylene, Polymer Fibres 2000, Manchester, UK, pp. 1, 2000.
• T.Kikutani, K.Nakao, wataru takarada, Hiroshi Ito. On-line Measurement of Orientation Development in High-Speed Melt Spinning of Poly(ethylene terephthalate), Proceedings of the 15th Polymer Processing Society Annual Meeting, pp. Film and Fibre, 18, 1999.
• Takeshi KIKUTANI, Wataru TAKARADA, Katsumi MOROHOSHI, Hiroshi ITO. High-Speed Melt Spinning of Non-Circular Cross-Section Fibers - Spinline Dynamics and Fiber Structure Formation -(共著）, Proceedings of the 4th International Union of Materials Research Societies International Conference in Asia, pp. 620, 1997.

国内会議発表 (査読有り)

• 池田佳祐, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーフィルムの逐次二軸延伸過程における複屈折変化, 日本レオロジー学会 第２１回 高分子加工技術討論会, Oct. 2009.

国際会議発表 (査読なし・不明)

• Takayuki Yoshiyama, Hirotaka Inoue, Masaki Hada, Daiki Chujo, Yoshitaka Saito, Karthik Paneer Selvam, Wataru Takarada, Hidetoshi Matsumoto, Yasuhiko Hayashi. Structural optimization of twisted-coiled soft actuators using polymer threads and twist-spun carbon nanotube yarns towards high actuation performance, The 5th International Nanofiber Symposium (Nanofibers 2018), Abstracts of Nanofibers 2018, The Nanofiber Society, Japan, pp. P-3, June 2018.
• K.Kawai, Y. Kohri, W. Takarada, T. Takebe, T. Kanai, T. Kikutani. Mutual interaction of two components in the crystallization of blend fibers consisting of polypropylenes of different stereo regularity, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• Qing Qin, Wataru Takarada, Takeshi Kikutani. Formation of beta-form crystals in high-speed melt spinning of biodegradable PHBH, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• R. Khanum, W. Takarada, A. Aneja, T. Kikutani. Solvent induced infusion behavior of poly(ethylene terephthalate) filaments during cold drawing, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• W. Takarada, R. Ruamsuk, Y. Zhang, T. Kikutani. Analysis on non-steady state spun-bonding process with short gap between spinneret and air sucker, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• Seiji Shibata, Wataru Takarada, Takeshi Kikutani. Analysis on crystallization behavior of oriented polymers utilizing differential scanning calorimetry of high heating rate, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Hideki Morioka, TAKESHI KIKUTANI, wataru takarada. Fiber structure development in high-speed melt spinning process of a new crystalline polycycloolefin, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Qing Qin, TAKESHI KIKUTANI, wataru takarada. Effect of processing conditions on crystallization behavior of PHBH in high-speed melt spinning process, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Kouya Kawai, Youhei Kohri, Wataru Takarada, Tomoaki Takebe, Toshitaka Kanai, Takeshi Kikutani. Mutual interaction of two components with different stereo regularity in crystallization of polypropylene blend fibers, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Keiichi Toyoda, Junichi Kojima, Tomoki Ishikawa, Takeshi Aoyagi, Wataru Takarada, Takeshi Kikutani. Multi-scale simulation for analysis of melt spinning process, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Renukarn Ruamsuk, TAKESHI KIKUTANI, wataru takarada. Effect of melt blowing die assembly on fiber formation behavior and web properties, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Ozlem Turkarslan, Sezen Gurdag, Emine Guven, Wataru Takarada, Takeshi Kikutani. Revisit polyester/liquid crystal blending and fiber spinning, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Toshiharu Iwasaki, TAKESHI KIKUTANI, wataru takarada. Optimization of heat sealing conditions for coextruded multilayer polyolefin film – Influence of sterilization treatment on seal property –, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Yuan Jing Zhang, Takeshi Kikutani, Wataru Takarada. Preparation of single-polymer composites from bicomponent fibers prepared by high-speed melt spinning process, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Yuki Takada, Wataru Takarada, Takeshi Kikutani. Stress-optical behavior of amorphous films during stretching and relaxation processes near glass transition, 30th International Conference of the Polymer Processing Society, Digital Book of Abstracts and Conference Papers of PPS-30, Polymer Processing Society, USB, June 2014.
• Satoshi Sugiura, Wataru Takarada, Takeshi Kikutani. Effect of polymer viscosities on the fiber structure and membrane properties of polypropylene / polyethylene bicomponent hollow fibers, 30th International Conference of the Polymer Processing Society, Digital Book of Abstracts and Conference Papers of PPS-30, Polymer Processing Society, USB, June 2014.
• Qing Qin, Wataru Takarada, Takeshi Kikutani. Fiber structure formation in melt spinning of bio-based aliphatic copolyesters, 30th International Conference of the Polymer Processing Society, Digital Book of Abstracts and Conference Papers of PPS-30, Polymer Processing Society, USB, June 2014.
• Yiwen Chen, Wataru Takarada, Takeshi Kikutani. On-line measurement and numerical simulation for melt-spinning process of bicomponent fibers with different cross-sectional configuration, Polymer Processing Society Asia/Australia Conference, Dec. 2013.
• Motoki Amiya, Wataru Takarada, Takeshi Kikutani. Enhancement of Fiber Strength of Various Polyesters utilizing CO2 Laser Irradiation in Melt Spinning Process, AWPP2013, Dec. 2013.
• Motoki Amiya, Masato Masuda, Wataru Takarada, Takeshi Kikutani. Development of High-strength Fibers of Various Polyesters, The 12th Asian Textile Conference, Oct. 2013.
• Yiwen Chen, Wataru Takarada, Takeshi Kikutani. Effect of Coss-sectional Cnfiguration on Fber Formation Behavior, The 12th Asian Textile Conference, Oct. 2013.
• Takeshi Kikutani, Yuan Jing Zhang, Wataru Takarada. Utilization of Bicomponent Melt Spinning Process for Preparation of Fiber-Reinforced Composites, 12th IUMRS International Conference on Advanced Materials, Sept. 2013.
• Zhang Yuan Jing, Takarada Wataru, Kikutani Takeshi. Utilization of spunbonding process of bicomponent fibers for preparation of fiber reinforced composites, 29th Internatnional Conference of the Polyemr Processing Society, Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society, USB, July 2013.
• Okamoto kenya, takarada wataru, takebe tomoaki, minami yutaka, Youhei Kohri, kanai toshitataka, kikutani takeshi. Effect of cross-sectional configuration on fiber properties in bicomponent melt spinning of polypropylenes with different stereo regularity, 29th Internatnional Conference of the Polyemr Processing Society, Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society, USB, July 2013.
• Xu Chen, Yamamoto Kiyoshi, Takarada Wataru, Kikutani Takeshi. Atmospheric pressure dyeability of poly(ethlene terephthalate) / poly(trimethylene terephthalate) blend fiber, 29th Internatnional Conference of the Polyemr Processing Society, Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society, USB, July 2013.
• Ruamsuk Renukarn, Takarada Wataru, Kikutani Takeshi. Effect of spinning conditions on fiber formation behavior in melt blowing process, Polymer Processing Society 28th Annual Meeting, Proceeding of The 28th International Conference of Polymer Processing Society, USB, Dec. 2012.
• Wataru Takarada, Noppadon kerddonfag, Wanee Chinsirikul, Takeshi Kikutani. Effect of D-lactide content on structure development behavior of polylactic acid films during uniaxial and sequential biaxial streching, Polymer Processing Society 28th Annual Meeting, Proceeding of The 28th International Conference of Polymer Processing Society, USB, Dec. 2012.
• 網谷基氣, 宝田亘, 鞠谷雄士. 溶融紡糸過程における炭酸ガスレーザー照射による各種ポリエステル繊維の高強度化, 第２０回プラスチック成形加工学会秋季大会, 成形加工シンポジア’１２, 一般社団法人 プラスチック成形加工学会, pp. 95-96, Nov. 2012.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Effect of blending of low isotacticity component on properties of isotactic polypropylene fibers prepared by high-speed melt spinning process, Asian Workshop of Polymer Processing 2012, Proceedings of AWPP 2012, pp. 196-199, Aug. 2012.
• Kenya Okamoto, wataru takarada, TAKESHI KIKUTANI, tomoaki takebe, yutaka minami, youhei kohri, toshitaka kanai. Effect of cross-sectional configuration on fiber formation behavior in bicomponent spinning of polypropoylene with different stereo regularity, Asian Workshop of Polymer Processing 2012, Proceedings of AWPP 2012, pp. 200-203, Aug. 2012.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Preparation of fiber reinforced composites utilizing spunbonding process of shath-core bicomponent fibers consisting of various polymer combinations, Asian Workshop of Polymer Processing 2012, Proceedings of AWPP 2012, pp. 204-207, Aug. 2012.
• H. Menju, W. Takarada, Takeshi Kikutani. Analysis on stress-optical behavior of carbondioxide based aliphatic polycarbonates, Polymer Processing Society Americas Conference 2012, Abstructs of PPS Americas Conference 2012, pp. 103-104, May 2012.
• Yoshiki Fujii, Wataru Takarada, Yuji Ogino, Ryokei Endo, Takeshi Kikutani. Structure and Properties of the Fibers of Thermoplastic Liquid Crystalline Polymer Prepared by Sheath-core Bicomponent Spinning, Asian Textile Conference - 11, Proceedings of the 11th Asian Textile Conference, pp. 114, Nov. 2011.
• Takahiro Sakurai, Wataru Takarada, Takeshi Kikutani, Tomoaki Takebe, Youhei Kohri, Toshitaka Kanai, Lixia Rong, Shigeyuki Toki, Benjamin S. Hsiao. Effect of the Blending of High-tacticity Component on the Structure and Properties of Elastomeric Fibers of Low-tacticity Polypropylene, International Symposium on New Frontiers in Fiber Materials Science, Proceedings of International Symposium on New Frontiers in Fiber Materials Science, The fiber society, Oct. 2011.  公式リンク  
  
• X.-S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of Surface Roughness Development in Melt Spinning of Blend Fibers for Artificial Hair, International Symposium on New Frontiers in Fiber Materials Science, Proceedings of International Symposium on New Frontiers in Fiber Materials Science, The fiber society, CD-ROM, Oct. 2011.  公式リンク  
  
• Xiaoshi Xu, Yutaka Shirakashi, Jyunya Ishibashi, Wataru Takarada, Takeshi Kikutani. Mechanism of Surface Roughness Development in Melt Spinning of Blends Fibers for Artificial Hair, Asian Joint Conference on Advanced Polymer Processing, Proceedings of Asian Joint Conference on Advanced Polymer Processing, pp. 124-125, Sept. 2011.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Elastic Recovery of Low-isotacticity Polypropylene Bicomponent Fibers, Asian Joint Conference on Advanced Polymer Processing, Proceedings of Asian Joint Conference on Advanced Polymer Processing, pp. 194-195, Sept. 2011.
• H. Menju, W. Takarada, T. Kikutani. Stress versus Birefringence Behavior during Uniaxial Stretching and Relaxation Processes of Cyclo-olefin Copolymer Films, Asian Joint Conference on Advanced Polymer Processing, Proceedings of Asian Joint Conference on Advanced Polymer Processing, pp. 2-5, Sept. 2011.
• H. Menju, W. Takarada, T. Kikutani. Effects of Temperature and Strain Rate on Stress versus Birefringence Behaviors during Uniaxial Stretching of Cyclo-olefin Copolymer Films, The Polymer Processing Society 27th Annual Meeting, Proceedings of Polymer Processing Society 27th Annual Meeting, Polymer Processing Society, May 2011.
• T. Sakurai, W. Takarada, T. Kikutani, T. Takebe, Y. Minami, Y. Kohri, T. Kanai, L. Rong, S. Toki, B. S. Hsiao. Analysis on the structural variation during the stretching and recovery of Elastomeric Fibers prepared from Polypropylenes of Low Stereo-regularity, The Polymer Processing Society 27th Annual Meeting, Proceedings of Polymer Processing Society 27th Annual Meeting, Polymer Processing Society, May 2011.
• X. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of surface roughness development in melt spinning of blend fibers, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• T. Kikutani, Y. Fujii, W. Takarada, Y. Ogino, R. Endo. Structure and properties of the fibers of thermoplastic liquid crystalline polymer prepared by sheath-core bicomponent spinning, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• Y. Shirakashi, O. Asakura, S. Ito, J. Ishibashi, X. Xu, W. Takarada, T. Kikutani. Spinning Conditions on Surface Roughness and Reflective Properties of PA/PET Blend Fibers for Artificial Hair, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• W. Takarada, J. L. Li, K. Kazama, X. M. Xie, T. Kikutani. Stability of the melt spinning process of Poly (ethylene terephthalate) with CO2 laser irradiation, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• N. Kerddonfag, W. Chinsirikul, O. Saravari, W. Takarada, T. Kikutani. Sequential and Simultaneous Biaxial Stretching of Polypropylene Films Containing -form crystalline Structure, Polymer Processing Society 26th Annual Meeting, Proceedings of Polymer Processing Society 26th Annual Meeting, Polymer Processing Society, CD-ROM, July 2010.
• Tomonori Furuyama, Wataru Takarada, TAKESHI KIKUTANI. Utilization of High-Speed Melt Spun Bicomponent Fibers for the Preparation of Reflective Polarizing Film, Polymer Processing Society 26th Annual Meeting, Proceedings of Polymer Processing Society 26th Annual Meeting, Polymer Processing Society, CD-ROM, July 2010.
• Ikeda Keisuke, Hiroto Menju, Takarada Wataru, Kikutani Takeshi. On-line measurement of birefringence development during stretching of cyclo olefin copolymer films, Polymer Processing Society 26th Annual Meeting, Proceedings of Polymer Processing Society 26th Annual Meeting, Polymer Processing Society, CD-ROM, July 2010.
• Tomonori furuyama, Wataru Takarada, Takeshi Kikutani. Utilization of Melt Spinning Process for the Preparation of Fibers with Optical Functionality, Advanced Polymeric Materials and Technology Symposium (APMT2010), Proceedings of APMT 2010, Jan. 2010.
• Keisuke Ikeda, Wataru Takarada, Takeshi Kikutani. Effect of Drawing History on Birefringence Development during Sequential Biaxial Stretching of Cyclo Olefin Copolymer Film, Advanced Polymeric Materials and Technology Symposium (APMT2010), Proceedings of APMT 2010, Jan. 2010.
• X. S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Analysis on the Development of Surface Roughness in Melt Spinning of Fibers for Artificial Hair, Advanced Polymeric Materials and Technology Symposium (APMT2010), Proceedings of APMT 2010, Jan. 2010.
• K. Ikeda, W. Takarada, T. Kikutani. On-line Measurement of Birefringence Development during Sequential Biaxial Stretching of cyclo Olefin Copolymer Films, Polymer Processing Society Europe / Africa Regional Meeting, Proceedings of Polymer Processing Society 25th Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2009.
• R. Aoki, S. Nakai, W. Takarada, T. Kikutani. Measurement of Birefringence Variation during Sequential Biaxial Stretching of PET Film, The 10th Asian Textile Conference, Proceedings of the 10th Asian Textile Conference, CD-ROM, Sept. 2009.
• X. S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Analysis on the Development of Surface Roughness in Melt Spinning of Fibers for Artificial Hair, The 10th Asian Textile Conference, Proceedings of the 10th Asian Textile Conference, CD-ROM, Sept. 2009.
• Q. Yuan, W. Takarada, H. Ito, T. Kikutani. Effect of Laser-Irradiation Heating in Melt Spinning Process of Polyoxymethylene on Structure and Properties of Resultant Fibers, Polymer Processing Society American Regional Meeting, Oct. 2008.
• Y. Kohri, W. Takarada, H. Ito, T. Kikutani, T. Takebe, H. Minami, T. Kanai. Effect of the Blending of Low Stereoregularity Component on Spinnability and Fiber Property Development in High-speed Melt Spinning of Polypropylene, Polymer Processing Society American Regional Meeting, Oct. 2008.
• R. Aoki, S.Yang, S.Nakai, W. Takarada, T.Kikutani. Effect of Drawing History on Higher-structure Development in Sequential Biaxial Stretching of PET Film, Asian Workshop on Polymer Processing, Book of Extended Abstracts, Asian Workshop on Polymer Processing, pp. 179-180, Aug. 2008.
• M. Kitayama, W. Takarada, T. T.Kikutani. Morphological and Mechanical Characteristics of Melt-spun Poly(ether ester) Thermoplastic Elastomer Fibers at Room and Low Temperatures, Asian Workshop on Polymer Processing, Book of Extended Abstracts, Asian Workshop on Polymer Processing, pp. 177-178, Aug. 2008.
• X. Shi, Y. Kohri, M. Kitayama, W. Takarada, H. Ito, T. T.Kikutani. Melt Spinning of Elastomeric Fibers, Asian Workshop on Polymer Processing, Book of Extended Abstracts, Asian Workshop on Polymer Processing, pp. 21-22, Aug. 2008.
• M.Kitayama, W.Takarada, H.Ito, T.Kikutani. Fiber Structure Development in Melt Spinning of Polyether-ester Elastomer, Polymer Fibres 2008, July 2008.
• Qi Yuan, Wataru Takarada, Hiroshi Ito, Takeshi Kikutani. Effect of Laser-irradiation Heating in Melt Spinning Process of Polyoxymethylene, Polymer Fibers 2008, July 2008.
• M.Kitayama, W.Takarada, H.Ito, T.Kikutani. Mechanism of Fiber Formation in Melt Spinning of Polyester ether Elastomer, Polymer Processing Society 24th Annual Meeting, June 2008.

国内会議発表 (査読なし・不明)

• Yang Zichen, 宝田亘, 松本英俊. ポリアミド11ナノファイバーの細径化が内部構造に与える影響, 2024繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 79, No. 1, pp. 2D15, June 2024.
• 李東陽, 宝田亘, 山本拓矢, 松本英俊. 重水素化溶媒を用いて作製した電界紡糸ポリアミドナノファイバーの構造と物性, 第71回高分子学会年次大会, 高分子学会予稿集, 公益社団法人高分子学会, Vol. 71, No. 1, pp. 1P2C031, May 2022.  公式リンク  
  
• 駒田ひろ, 田岡祐樹, 宝田亘, 齋藤滋規. 微細毛静電チャックの表面柔軟性確保のためのシート状交互五層（導電層、絶縁層）高分子複合材料の開発, 2022年度精密工学会春季大会学術講演会, 2022年度精密工学会春季大会学術講演会論文集, 公益財団法人精密工学会, Mar. 2022.
• 李東陽, 芦沢 実, 宝田 亘, 松本 英俊, 山本 拓矢. ポリアミドナノファイバーの物性に与える水素結合の影響, 2021年繊維学会年次大会, 繊維学会予稿集, 一般社団法人繊維学会, pp. 2PC217, June 2021.
• 藤田優希, 井上寛隆, 中川智広, 吉田啓一郎, 松本英俊, 宝田亘, 鈴木弘朗, 西川亘, 山下善文, 林靖彦. 直鎖低密度ポリエチレン糸ソフトアクチュエータ特性の結晶構造依存性, 2020年度 応用物理・物理系会 中国四国支部合同学術講演会, 応用物理・物理系学会中国四国支部合同学術講演会講演予稿集, Gp-1, July 2020.
• 吉田啓一郎, 宝田亘, 松本英俊, 井上寛隆, 千葉悠佑, 藤田優希, 山田雅人, 林靖彦. 高分子繊維/CNT 紡績糸複合型アクチュエータの特性に与える 高分子繊維構造の影響, 2020年度繊維学会年次大会, 繊維学会予稿集, 一般社団法人繊維学会, Vol. 75, No. 1, pp. 1P237, June 2020.
• 千葉悠祐, 井上寛隆, 羽田真毅, 宝田亘, 松本英俊, 林靖彦. カーボンナノチューブ（CNT）紡績糸とポリエチレンテレフタレート（PET）糸からなる複合撚糸型ソフトアクチュエータの開発, 日本繊維機械学会第72回年次大会, 日本繊維機械学会第72回年次大会講演要旨集, 一般社団法人日本繊維機械学会, May 2019.
• 吉山貴之, 井上寛隆, 齋藤慶考, 羽田真毅, 宝田亘, 松本英俊, 林靖彦. カーボンナノチューブ（CNT）紡績糸とポリエチレンテレフタレート（PET）糸からなる複合撚糸型ソフトアクチュエータの開発, 日本繊維機械学会第71回年次大会, 日本繊維機械学会第71回年次大会講演要旨集, 一般社団法人日本繊維機械学会, May 2018.
• 井上寛隆, 吉山貴之, 中條大樹, 齋藤慶考, 羽田真毅, 西川 亘, 山下善文, 宝田亘, 松本英俊, 林靖彦. 高分子線材/CNT紡績糸マルチフィラメント・ソフトアクチュエータの開発, 第65回応用物理学会春季学術講演会, 第65回応用物理学会春季学術講演会講演予稿集, 公益社団法人応用物理学会, pp. 18a-C303-3, Mar. 2018.  公式リンク  
  
• 宝田 亘. 高速 DSC を用いた配向高分子の結晶化速度の定量解析, 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 28, No. 11, pp. 438-440, Sept. 2016.
• 宝田 亘. プラスチック成型加工技術者のための光学講座(第2章)光学特性の測定原理と測定方法(2.4)複屈折測定, 成形加工 = Journal of the Japan Society of Polymer Processing : プラスチック成形加工学会誌 / プラスチック成形加工学会編集委員会 編, プラスチック成形加工学会, Vol. 28, No. 1, pp. 22-25, Dec. 2015.
• 森岡英樹, 宝田亘, 鞠谷. 複合溶融紡糸による新規結晶性ポリシクロオレフィンの繊維構造形成促進, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 353-354, Nov. 2014.
• 柴田晟至, 宝田亘, 鞠谷. 高速DSCを用いた配向非晶ポリエチレンテレフタレート繊維の結晶化挙動解析, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 355-356, Nov. 2014.
• 高田裕貴, 宝田亘, 鞠谷. 非晶フィルムの多段伸長・緩和過程における応力-光学挙動 -変形倍率および歪速度の影響-, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 377-379, Nov. 2014.
• 岩崎年晴, 宝田亘, 鞠谷. 多層ポリオレフィンフィルムのヒートシール物性の発現機構とヒートシール条件の最適化 -シール層材の違いによるシール特性への影響2-, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 345-346, Nov. 2014.
• 川合康矢, 宝田亘, 鞠谷雄士, 武部智明, 郡洋平, 金井俊孝. 立体規則性の異なるポリプロピレンからなるブレンド繊維の結晶化における成分間相互作用, 第63回 高分子討論会, 高分子学会予稿集, Vol. 63, No. 2, CD-ROM, Sept. 2014.
• 杉浦聡, 宝田亘, 鞠谷雄士. 溶融紡糸・延伸法による中空糸膜の製造における未延伸糸の構造と中空糸膜の性能の関係, 第63回 高分子討論会, 高分子学会予稿集, Vol. 63, No. 2, CD-ROM, Sept. 2014.
• 河原 豊, 小野里翔大, 宝田 亘, 鞠谷雄士. 高速紡糸PLA/PBT芯鞘複合繊維の構造と物性, 繊維学会 平成26年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 69, No. 1, CD-ROM, June 2014.
• Zhang YuanJing, 宝田亘, 鞠谷雄士. Analysis on fiber spinning behavior in spunbonding process, 繊維学会 平成26年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 69, No. 1, CD-ROM, June 2014.
• 杉浦聡, 宝田亘, 鞠谷雄士. 溶融紡糸・延伸法による複合中空糸膜の作製, プラスチック成形加工学会 第25回年次大会, 成形加工 ’１４, pp. 275-276, May 2014.
• 川合康矢, 宝田亘, 鞠谷雄士, 武部智明, 郡洋平, 金井俊孝. ポリプロピレンブレンド繊維の結晶化における立体規則性の異なる2成分間相互作用, プラスチック成形加工学会 第25回年次大会, 成形加工 ’１４, pp. 279-280, May 2014.
• Qing Qin, wataru takarada, TAKESHI KIKUTANI. Fiber Structure Development through Orientation-induced Crystallization in High-speed Melt Spinning of PHBH, Seikei-Kakou Annual Meeting 2014, Preprints of Seikei-Kakou Annual Meeting 2014, pp. 277-278, May 2014.
• 岩崎年晴, 宝田亘, 鞠谷雄士. 多層ポリオレフィンフィルムのヒートシール物性の発現機構とヒートシール条件の最適化 －シール層材の違いによるシール特性への影響－, プラスチック成形加工学会 第25回年次大会, 成形加工 ’１４, pp. 273-274, May 2014.
• 川村一輝, HEMTHAVYPASOMPHONE, 宝田亘, 鞠谷雄士, 高橋邦夫, 齋藤滋規. 双極型静電誘導ファイバーの配列に際して電極形状が静電力に与える効果, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, 精密工学会, No. J14, pp. 737-738, Mar. 2014.
• 森岡 英樹, 宝田 亘, 鞠谷 雄士. 新規結晶性ポリシクロオレフィンの高速紡糸における繊維構造形成, プラスチック成形加工学会 第21回秋季大会, 成形加工シンポジア ’１３, プラスチック成形加工学会, pp. 309-310, Oct. 2013.
• 杉浦 聡, 宝田 亘, 鞠谷 雄士. 溶融紡糸・延伸法による複合中空糸膜の作製条件と膜特性の関係, プラスチック成形加工学会 第21回秋季大会, 成形加工シンポジア ’１３, プラスチック成形加工学会, pp. 243-244, Oct. 2013.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Spinning behavior of bicomponent fibers in spunbonding process for preparing fiber reinforced composites, Seikei-Kakou Autumnal Meeting 2013, Preprints of Seikei-Kakou Autumnal Meeting 2013, Japan society of polymer processing, pp. 307-308, Oct. 2013.
• 岩崎 年晴, 宝田 亘, 鞠谷 雄士. 多層オレフィンフィルムのヒートシール物性の発現機構とヒートシール条件の最適化 ーヒートシール強度の熱処理条件の影響ー, プラスチック成形加工学会 第21回秋季大会, 成形加工シンポジア ’１３, プラスチック成形加工学会, pp. 235-236, Oct. 2013.
• Qing Qin, wataru takarada, TAKESHI KIKUTANI. Enhancement of the crystallization of PHBH by applying high-speed melt spinning process, 平成25年度 繊維学会秋期研究発表会, Fiber preprints, Japan, The Society of Fiber Science and Technology, Japan, Vol. 68, No. 2, pp. 148, Sept. 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸長・緩和過程における配向挙動に及ぼす予備加熱効果, 平成25年度 繊維学会秋期研究発表会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 2, pp. 81, Sept. 2013.
• 高田裕貴, 宝田亘, 鞠谷雄士. ガラス転移温度近傍における非晶フィルムの伸長・緩和挙動の解析, 平成25年度 繊維学会秋期研究発表会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 2, pp. 20, Sept. 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエステルフィルムの1軸・2軸伸長における結晶配向挙動に及ぼす予備加熱効果, 第62回 高分子討論会, 高分子学会予稿集, Vol. 62, No. 2, CD-ROM, Aug. 2013.
• 網谷 基氣, 宝田 亘, 鞠谷 雄士. 溶融紡糸過程における炭酸ガスレーザー照射による各種ポリエステル繊維の高強度化, 平成25年度 繊維学会年次大会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 1, CD-ROM, June 2013.
• Y. Chen, W. Takarada, T. Kikutani. Effect of cross-sectional configuration of fibers on fiber formation behavior in bicomponent melt spinning process, 平成25年度 繊維学会年次大会, Fiber preprints, Japan, The Society of Fiber Science and Technology, Japan, Vol. 68, No. 1, CD-ROM, June 2013.
• 小野里翔大, 花田基洋, 市川 菫, 河原 豊, 宝田 亘, 鞠谷雄士. 高速紡糸PLA/PBT複合繊維の構造, 平成25年度 繊維学会年次大会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 1, CD-ROM, June 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの1軸・2軸伸長における3次元的配向挙動に及ぼす予備加熱効果, 第63回 高分子学会年次大会, 高分子学会予稿集, Vol. 63, No. 1, CD-ROM, May 2013.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Preparation of fiber reinforced composites utilizing structure development of bicomponent fibers in spounbonding process, 日本繊維機械学会 第66回 年次大会, 日本繊維機械学会 第66回 年次大会 研究発表論文集, The textile machinery society of japan, pp. 158, May 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸長・緩和過程における三次元的配向挙動に及ぼす予備加熱の効果, プラスチック成形加工学会 第２４回年次大会, 成形加工’１３, pp. 233-234, May 2013.
• Renukarn, Wataru Takarada, Takeshi Kikutani. Effect of Polymer Characteristics on Fiber Formation Behavior and Web Properties in Melt Blowing Process - Comparison of Polymethylpentene and Polypropylene �, プラスチック成形加工学会 第２４回年次大会, Preprints of Seikei-Kakou Annual Meeting 2013, pp. 231-232, May 2013.
• 杉浦聡, 宝田亘, 鞠谷雄士. ポリプロピレン中空糸の膜特性と溶融紡糸・延伸条件の関係, プラスチック成形加工学会 第２４回年次大会, 成形加工’１３, pp. 231-232, May 2013.
• 岩崎年晴, 宝田亘, 鞠谷雄士. 多層オレフィンフィルムのヒートシール条件の最適化 ‐ シールバー形状と圧力の影響 ‐, プラスチック成形加工学会 第２４回年次大会, 成形加工’１３, pp. 229-230, May 2013.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Effect of processing conditions in preparation of fiber reinforced composites utilizing shath-core bicomponent spinning, 第２０回プラスチック成形加工学会秋季大会, Preprints of Seikei-Kakou Autumnal Meeting 2012, pp. 93, Nov. 2012.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸長・緩和過程における応力－複屈折挙動に及ぼす予備加熱の効果, 第２４回高分子加工技術討論会, 第２４回高分子加工技術討論会要旨集, Oct. 2012.
• 岡本謙也, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 郡洋平, 金井俊孝. 立体規則性の異なるポリプロピレンの複合紡糸における断面形状が繊維構造に及ぼす効果, 平成24年度繊維学会秋期研究発表会, 繊維学会予稿集, 一般社団法人 繊維学会, Vol. 67, No. 2, pp. 104, Sept. 2012.
• Y. Chen, W. Takarada, T. Kikutani. Effect of interface between tow polymers on elongational flow behavior in bicomponent melt spinning process, 平成24年度繊維学会秋期研究発表会, Fiber Preprints, Japan, 一般社団法人 繊維学会, Vol. 67, No. 2, pp. 103, Sept. 2012.
• Yiwen Chen, Wataru Takarada, Abdellah Ajji, Takeshi Kikutani. Structure development in melt-spinning of high density polyethylene/polyamide 6 bicomponent fibers, 第２３回プラスチック成形加工学会年次大会, Preprints of Seikei-Kakou Annual Meeting 2012, プラスチック成形加工学会, pp. 253-254, June 2012.
• 杉浦聡, 宝田亘, 鞠谷雄士. 溶融紡糸・延伸法によるポリプロピレン新規中空糸膜の開発, 繊維学会予稿集, Vol. 67, No. 1, pp. 264, June 2012.
• 網谷 基氣, 宝田 亘, 鞠谷 雄士. 各種ポリエステル繊維の溶融紡糸過程における炭酸ガスレーザー照射が繊維の構造と物性に及ぼす影響, 繊維学会予稿集, Vol. 67, No. 1, pp. 169, June 2012.
• X.-S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Evaluation of surface roughness development of blend fibers through fiber diameter measurement using various optical equipments, 日本繊維機械学会 第65回 年次大会, 日本繊維機械学会 第65回年次大会 研究発表論文集, 繊維機械学会, pp. 168-169, June 2012.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸張・緩和過程における応力・複屈折挙動におよぼす予備加熱の影響, 第２３回プラスチック成形加工学会年次大会, 成形加工 '12, プラスチック成形加工学会, pp. 255-256, June 2012.
• 毛受広人, 宝田亘, 鞠谷雄士. さまざまな非晶性ポリマーの伸張・緩和過程における応力-光学特性の解析, 繊維学会予稿集, Vol. 67, No. 1, pp. 293, June 2012.
• 藤井良樹, 宝田亘, 荻野裕二, 遠藤了慶, 鞠谷雄士. 熱可塑性液晶繊維の加熱時の寸法変化に及ぼす繊維構造の影響, 第２３回プラスチック成形加工学会年次大会, 成形加工 '12, プラスチック成形加工学会, pp. 213-214, June 2012.
• 岡本謙也, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 郡洋平, 金井俊孝. 立体規則性の異なるポリプロピレンの複合紡糸における断面形態が繊維形成挙動に及ぼす効果, 第２３回プラスチック成形加工学会年次大会, 成形加工 '12, プラスチック成形加工学会, pp. 259-260, June 2012.
• 毛受広人, 宝田亘, 鞠谷雄士. 二酸化炭素を原料とする脂肪族ポリカーボネートの応力-光学特性の解析, 第２０回 ポリマー材料フォーラム 講演予稿集, pp. 222-223, Nov. 2011.
• 網谷 基氣, 宝田 亘, 鞠谷 雄士. 溶融体構造制御を利用したポリエチレンナフタレート繊維の高強度化, 第１９回成形加工学会秋季大会 成形加工シンポジア '11, 成形加工シンポジア '11, プラスチック成形加工学会, pp. 375-376, Oct. 2011.
• 梅本晋, 薄田健一郎, 宝田亘, 鞠谷雄士, 奥居徳昌. 溶融結晶化過程での飽和型核発生挙動に関する研究, 第60回 高分子討論会, 高分子学会予稿集, 高分子学会, Vol. 60, No. 2, pp. 2972, Sept. 2011.
• 毛受 広人, 宝田 亘, 鞠谷 雄士. 環状オレフィン共重合体の延伸過程における分子鎖挙動の温度・歪速度依存性, 平成２３年度 繊維学会秋期研究発表会, 繊維学会予稿集, 繊維学会, Vol. 66, No. 2, pp. 76, Sept. 2011.
• 櫻井貴宏, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 郡洋平, 金井俊孝. 低立体規則性ポリプロピレンを用いて作製した弾性糸の構造と物性, 第２２回 プラスチック成形加工学会 年次大会, 成形加工 '11, プラスチック成型加工学会, p. 213-214, June 2011.
• 古山智政, 宝田亘, 鞠谷雄士. 複合高速紡糸繊維を利用した反射型偏光フィルムの試作における繊維構造および断面形状の効果, 平成２３年度 繊維学会年次大会, 繊維学会予稿集, 社団法人 繊維学会, Vol. 66, No. 1, p. 226, June 2011.
• 薄田 健一郎, 梅本 晋, 奥居 徳昌, 宝田 亘, 鞠谷 雄士. ポリエチレンサクシネートの飽和型核発生挙動, 繊維学会年次大会, 繊維学会予稿集, Vol. 66, No. 1, pp. 127, June 2011.
• X.-S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of Surface Roughmess Development in Melt Spinning of Blend Fibers for Artificial Hair, The Japan Society of Polymer Processing 22nd Annual Meeting, Preprints of Seikei-Kakou Annual Meeting 2011, The Japan Society of Polymer Processing, p. 213-214, June 2011.
• 網谷基氣, 宝田亘, 鞠谷雄士. 溶融体構造制御を利用したPEN繊維の高強度化, 日本繊維機械学会 第６４回 年次大会, 日本繊維機械学会 第６４回 年次大会 研究発表論文集, 日本繊維機械学会, p. 233, May 2011.
• 澤井賢司, 宝田亘, 鞠谷雄士, 高橋邦夫, 齋藤滋規. 静電誘導ファイバー集積構造による曲面対応静電チャックの開発, 2011年度精密工学会春季大会, 2011年度精密工学会春季大会論文集, pp.877-878, Mar. 2011.
• 古山智政, 宝田亘, 鞠谷雄士. 高速溶融紡糸を利用した反射型偏光フィルムの試作における複合繊維断面形状の効果, 成形加工シンポジア'10, 成形加工シンポジア'10, プラスチック成形加工学会, p. 255, Nov. 2010.
• X. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of surface roughness development in melt spinning of blend fibers for artificial hair, 平成２２年度繊維学会秋季大会, Fiber Preprints, Japan, The Society of Fiber Science and Technology, Japan, Vol. 65, No. 3, Sept. 2010.
• 内田裕太, 宝田亘, 鞠谷雄士. 極微小エアーギャップ溶融紡糸における繊維構造形成に及ぼす分子鎖剛直性の影響, 第２１回プラスチック成形加工学会年次大会, 成形加工'10, プラスチック成型加工学会, p. 147, June 2010.
• 青木里紗, 宝田亘, 鞠谷雄士. PETフィルムの一軸および二軸延伸における複屈折形成挙動に及ぼす熱履歴の効果, 平成２２年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 65, No. 1, p. 189, June 2010.
• 藤井良樹, 荻野祐二, 遠藤了慶, 宝田亘, 鞠谷雄士. 芯鞘型複合紡糸により作製した熱可塑性液晶繊維の力学特性, 平成２２年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 65, No. 1, p. 185, June 2010.
• 毛受広人, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーのガラス転移点近傍での伸長挙動の温度・歪速度依存性, 第２１回プラスチック成形加工学会年次大会, 成形加工'10, プラスチック成型加工学会, p. 147, June 2010.
• 徐暁師, 白樫豊, 石橋準也, 宝田亘, 鞠谷雄士. 人工毛髪用繊維の溶融紡糸における紡糸条件の繊維表面粗度への影響, 第２１回プラスチック成形加工学会年次大会, 成形加工'10, プラスチック成型加工学会, p. 145, June 2010.
• 早田史明, 宝田亘, 鞠谷雄士, 齋藤滋規. 静電誘導ファイバーによる物体吸着機構の開発, 2010年度精密工学会春季大会, 2010年度精密工学会春季大会論文集, pp.627-628, Mar. 2010.
• 李佳林, 宝田亘, 風間邦彦, 鞠谷雄士. 炭酸ガスレーザー照射溶融紡糸における紡糸線の安定性に関する研究, 第１７回 プラスチック成形加工学会 秋季大会 （成形加工シンポジア'09）, 成形加工シンポジア'09, プラスチック成形加工学会, p. 35, Nov. 2009.
• 古山智政, 宝田亘, 鞠谷雄士. 複合繊維の高速溶融紡糸における複屈折制御性を利用した光学機能繊維の開発, 第１７回 プラスチック成形加工学会 秋季大会 （成形加工シンポジア'09）, 成形加工シンポジア'09, プラスチック成形加工学会, p. 165, Nov. 2009.
• X. S. Xu, Y. Shirakashi, J. Ishiashi, W. Takarada, T. Kikutani. Analysis on the development of surface roughness in melt sinning of fibers for artificial hair, プラスチック成形加工学会 第２０回年次大会, JSPP '09 Technical Papers, プラスチック成形加工学会, p. 221, June 2009.
• 北山雅哉, 宝田亘, 鞠谷雄士. 溶融紡糸により作製したポリエーテルエステル系熱可塑性エラストマー繊維の低温特性, 平成２１年度 繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 64, No. 1, p. 161, June 2009.
• 古山智政, 宝田亘, 鞠谷雄士. 複合繊維の高速溶融紡糸における複屈折制御性を利用した光学機能繊維の開発, 平成２１年度 繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 64, No. 1, p. 162, June 2009.
• 内田裕太, 塩谷朋之, 宝田亘, 鞠谷雄士. 極微小エアーギャップ溶融紡糸における繊維構造形成機構に及ぼす分子鎖剛直性の影響, 平成２１年度 繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 64, No. 1, p. 163, June 2009.
• LI Jia-Lin, wataru takarada, TAKESHI KIKUTANI. Stability of the melt spinning process of poly(ethylene terephthalate) with CO2 laser irradiation: Experiment and simulation, 平成２１年度 繊維学会年次大会, Fiber Preprints, Japan, 繊維学会, Vol. 64, No. 1, p. 256, June 2009.
• 池田佳祐, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーフィルムの逐次二軸延伸過程における複屈折変化, プラスチック成形加工学会 第２０回年次大会, 成型加工'09, プラスチック成形加工学会, p. 215, June 2009.
• 櫻井貴宏, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 金井俊孝. 組成分布制御ポリプロピレンを用いた弾性糸の開発, プラスチック成形加工学会 第２０回年次大会, 成型加工'09, プラスチック成形加工学会, p. 225, June 2009.
• 青木 里紗, 中居 真一, 宝田 亘, 鞠谷 雄士. PETフィルムの逐次二軸延伸過程における複屈折変化, 日本繊維機械学会 第62回年次大会, May 2009.
• 池田佳祐, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーフィルムの逐次二軸延伸過程における複屈折変化の延伸履歴依存性, 第１６回プラスチック成型加工学会秋季大会 成形加工シンポジア’０８, 成形加工シンポジア’０８, pp. 93-94, Oct. 2008.
• 北山雅哉, 宝田亘, 鞠谷雄士. 溶融紡糸法により作製したポリエーテルエステル系熱可塑性エラストマー繊維の室温及び低温での構造・力学特性評価, 第１６回プラスチック成型加工学会秋季大会 成形加工シンポジア’０８, 成形加工シンポジア’０８, プラスチック成型加工学会, pp. 99-100, Oct. 2008.
• 北山雅哉, 宝田亘, 鞠谷雄士. ソフトセグメントの異なるポリエーテルエステル系熱可塑性エラストマーの溶融紡糸と繊維構造形成, プラスチック成形加工学会 第１９回年次大会, June 2008.
• 池田佳祐, 宝田亘, 鞠谷雄士, 伊藤浩志. 環状オレフィンコポリマーフィルムの二軸伸長過程における複屈折変化, 平成２０年度繊維学会年次大会, 繊維学会予稿集2008, Vol. 63, No. 1 and 2, pp. 97, June 2008.
• 郡洋平, 宝田亘, 鞠谷雄士, 伊藤浩志, 武部智明, 南裕, 金井俊孝. ポリプロピレンの溶融紡糸における低立体規則性成分添加効果 －立体規則性，分子量依存性－, 平成２０年度繊維学会年次大会, 繊維学会予稿集2008, Vol. 63, No. 1 and 2, pp. 92, June 2008.
• 青木里紗, 楊勝林, 宝田亘, 鞠谷雄士, 中居真一. 逐次二軸延伸PET フィルムの高次構造形成に及ぼす延伸履歴依存性, プラスチック成形加工学会 第１９回年次大会, June 2008.
• 戚 媛, 伊藤浩志, 宝田亘, 鞠谷雄士. ポリオキシメチレンの溶融紡糸における紡糸線のレーザー加熱による繊維物性の改良, 日本繊維機械学会第６１回年次大会, May 2008.
• 内田裕太, 塩谷朋之, 宝田亘, 伊藤浩志, 鞠谷雄士. 極微小エアーギャップ溶融紡糸における紡糸過程の安定化と繊維構造形成, 第５７回高分子学会年次大会, May 2008.

その他の論文・著書など

• 入澤寿平, 中林 康治, 野々口 斐之, 森本 正人, 宝田亘. 次世代炭素繊維開発に関する新たな取組み, 工業材料, Vol. 70, No. 6, pp. 14-19, Oct. 2022.
• 木村大輔, 入澤寿平, 高木賢太郎, 田原 健二, 櫻井 大地, 渡邊 晴彦, 宝田 亘, 塩谷正俊. ポリアミド繊維の可逆的な熱膨張／収縮に関する研究, 繊維学会誌, 社団法人 繊維学会, Vol. 78, No. 5, pp. 192-194, May 2022.
• 宝田 亘. (聴講記) 可視化技術が解き放つ成形現象の不思議 (講演者 : YOKOI Labo 横井秀俊 氏), 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 34, No. 5, pp. 164-166, Apr. 2022.
• 宝田 亘. 長繊維不織布の製造法 ～スパンボンド法とメルトブロー法～, 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 33, No. 2, pp. 45-49, Jan. 2021.
• wataru takarada. PPS Europe-Africa 2019, 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 32, No. 6, pp. 218-219, May 2020.
• wataru takarada. AWPP 2017 Hanoi, 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 30, No. 9, pp. 486-488, July 2018.
• 宝田亘, 鞠谷雄士. 紡糸工学的イノベーションによる新規繊維材料開発, 繊維学会誌, Vol. 72, No. 7, July 2016.
• 大田 善也, 渡邉 久芳, 加藤 真理子, 宝田 亘, 鞠谷雄士. フルオレン含有ポリエステルを用いた複屈折発現性評価法の検討, 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 27, No. 3, pp. 94-97, Jan. 2015.
• 宝田亘. 透明樹脂・フィルムの屈折率・複屈折とその測定方法, 透明樹脂・フィルムへの機能性付与と応用技術, 技術情報協会, pp. 596-602, Nov. 2014.
• 宝田亘. 若手研究委員会, 繊維学会誌, The Society of Fiber Science and Technology, Japan, Vol. 70, No. 7, pp. P-215-P-215, 2014.
• 宝田 亘. 高度に立体規則性を制御したポリプロピレンを用いた高速溶融紡糸の研究, 繊維学会誌, 社団法人 繊維学会, Vol. 68, No. 9, pp. P_272-P277, Sept. 2012.
• 宝田亘. 若手研究委員会, 繊維学会誌, The Society of Fiber Science and Technology, Japan, Vol. 68, No. 2, pp. P_41-P41, 2012.
• 宝田亘. 紡糸・フィルム成形, 成形加工, プラスチック成型加工学会, Vol. 22, No. 7, p. 333-338, July 2010.
• 鞠谷 雄士, 宝田 亘. 複屈折の測定法と解析事例, 繊維学会誌 繊維と工業, 繊維学会, Vol. 66, No. 1, pp. P-39 - P-44, Jan. 2010.
• 宝田亘. 海外だより アーヘン工科大学テキスタイル技術研究所, 成形加工, プラスチック成型加工学会, Vol. 21, No. 9, p. 559, Sept. 2009.
• 宝田 亘. 海外研究機関の紹介；アーヘン工科大学テキスタイル技術研究所, 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 21, No. 9, pp. 559-560, July 2009.

特許など

• 宝田亘, ▲高▼▲崎▼ 緑, ホ ゾンズ, 鞠谷　雄士. 複合繊維の製造方法および複合繊維. 特許. 公開. 国立大学法人東京工業大学, 国立大学法人京都工芸繊維大学. 2022/10/31. 特願2022-174240. 2024/05/15. 特開2024-065394. 2024.
• 鞠谷雄士, 宝田亘, 三枝　孝拓. 低収縮及び易加水分解性を有するポリグリコール酸繊維. 特許. 公開. 国立大学法人東京工業大学, 株式会社クレハ. 2020/10/26. 特願2020-179119. 2022/05/12. 特開2022-070091. 2022.
• 鞠谷雄士, 宝田亘, 宮尾友貴, 畑野　貴典　, シティ　サラ. 生分解性繊維の製造方法. 特許. 登録. 国立大学法人東京工業大学, 株式会社カネカ. 2019/02/15. 特願2019-025873. 2020/08/31. 特開2020-133022. 特許第7289475号. 2023/06/02 2023.
• 鞠谷雄士, 宝田亘, 金澤岳. 弾性繊維およびその製造方法. 特許. 登録. 国立大学法人東京工業大学. 2018/06/05. 特願2018-108143. 2019/12/12. 特開2019-210571. 特許第7237326号. 2023/03/03 2023.
• 鞠谷雄士, 宝田亘, 高崎　緑　, 小林　治樹　, 鶴田　遼　, 徳田　智己　, 中島　啓太. 繊維シートの製造方法. 特許. 登録. 国立大学法人東京工業大学, 国立大学法人京都工芸繊維大学. 2017/06/02. 特願2017-110021. 2018/12/27. 特開2018-204140. 特許第6928345号. 2021/08/11 2021.
• 鞠谷雄士, 宝田亘, 鈴木　紀之　, シティ　サラ　, 福田　竜司　. 生分解性脂肪族ポリエステル系繊維および製造方法. 特許. 登録. 国立大学法人東京工業大学, 株式会社カネカ. 2017/01/11. 特願2017-561137. 2018/11/01. 再表2017/122679. 特許第6854487号. 2021/03/18 2021.
• 鞠谷雄士, 宝田亘, 鈴木　紀之　, 南　徹也　, 菅谷　剛彦　. ポリエステル繊維. 特許. 登録. 国立大学法人東京工業大学, 株式会社カネカ. 2014/07/16. 特願2015-533951. 2017/03/02. 再表2015/029316. 特許第6592862号. 2019/10/04 2019.
• 鞠谷雄士, 宝田亘, 笹本　太, 上阪　努. 複合中空糸膜およびその製造方法. 特許. 公開. 国立大学法人東京工業大学, 東レ株式会社. 2014/03/12. 特願2014-049157. 2015/10/01. 特開2015-171697. 2015.

学位論文

• 異形断面繊維の溶融紡糸に関する研究,  本文,  Doctor of Engineering,  Tokyo Institute of Technology,  2000/03/--, 

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]